<html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</style>
</head>
<body class='hmmessage'>
Mudassar,<BR>
You should try show controler e1 and show isdn status to check the status of your E1 PRI circuite. show voice port summary can only show the active calls, that's why you got nothing by this command.<BR>
<BR>David<BR><BR><BR><BR>> Date: Sun, 2 Dec 2007 08:48:23 -0600<BR>> From: jonvoip@gmail.com<BR>> To: zohaibshabir@gmail.com<BR>> CC: Mudassar.khalid@waridtel.com; cisco-voip@puck.nether.net<BR>> Subject: Re: [cisco-voip] AS5350 isdn voice port are down.Why<BR>> <BR>> Even if the cable were unplugged, the ports would show up with a show<BR>> voice port summary...<BR>> <BR>> The fact that nothing is shut down indicates something<BR>> software-related, the IOS isn't seeing the interfaces from a<BR>> code-level...<BR>> <BR>> I would upgrade the IOS and try again...<BR>> <BR>> <BR>> <BR>> Jonathan<BR>> <BR>> On Dec 2, 2007 12:01 AM, zohaib shabir <zohaibshabir@gmail.com> wrote:<BR>> > No Mudasser,<BR>> > You will always see the port status whether you place a call or not. If<BR>> > these ports are down sh command will show you give you the down port status.<BR>> > I don't know the exact cause but may be switch side is not configured<BR>> > properly or AS5350 is not configured correctly, once these PRI's are sync to<BR>> > your gateway, you will see the port status. If you tell me the exact Call<BR>> > flow then may be i will be able to help you.<BR>> ><BR>> > Regards,<BR>> > Zohaib Shabir<BR>> > Network Engineer(Voice)<BR>> > DWP Group, TECH Division Karachi<BR>> > Ph:+92-302-8232689<BR>> ><BR>> ><BR>> ><BR>> > On Dec 2, 2007 8:50 AM, Tom Storey < tom@snnap.net> wrote:<BR>> > > Try placing a call and you should see something listed.<BR>> > ><BR>> > > I just had a look at a voice gateway belonging to my employer (AS5400) and<BR>> > > it would seem that you wont see anything unless a channel is in use for a<BR>> > > voice call.<BR>> > ><BR>> > ><BR>> > ><BR>> > ><BR>> > > > Dear all,<BR>> > > > Cisco Tac is not responding due to weekend and i have to complete<BR>> > > > this task upto monday.<BR>> > > > I am using AS5350XM gateway with 4 PRIs terminated.attached is the file<BR>> > > > contain running-config of the router. Can anybody tell me what is the<BR>> > > > problem in configuration so that when i give following show voice port<BR>> > > > summ comman . no output displayed . mean why voice ports are not going<BR>> > to<BR>> > > > up state.<BR>> > > ><BR>> > > ><BR>> > > > G_RTR5350_01#show voice port summary<BR>> > > > IN OUT<BR>> > > > PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC<BR>> > > > ========= == ============ ===== ==== ======== ======== ==<BR>> > > > CG_RTR5350_01#<BR>> > > ><BR>> > > > I will be obliged to you.<BR>> > > > Thanks in advance.<BR>> > > ><BR>> > > ><BR>> > > > Kind Regards,<BR>> > > > Mudassar Khalid<BR>> > > > Network Engineer (IPCC/ IPT)<BR>> > > > O & M Team - Lahore<BR>> > > > Cell: +92 (0) 322-448-1004 | IPT Extension: 46711<BR>> > > > _______________________________________________<BR>> > > > cisco-voip mailing list<BR>> > > > cisco-voip@puck.nether.net<BR>> > > > https://puck.nether.net/mailman/listinfo/cisco-voip<BR>> > ><BR>> > > _______________________________________________<BR>> > > cisco-voip mailing list<BR>> > > cisco-voip@puck.nether.net<BR>> > > https://puck.nether.net/mailman/listinfo/cisco-voip<BR>> > ><BR>> ><BR>> ><BR>> ><BR>> > --<BR>> ><BR>> ><BR>> > _______________________________________________<BR>> > cisco-voip mailing list<BR>> > cisco-voip@puck.nether.net<BR>> > https://puck.nether.net/mailman/listinfo/cisco-voip<BR>> ><BR>> _______________________________________________<BR>> cisco-voip mailing list<BR>> cisco-voip@puck.nether.net<BR>> https://puck.nether.net/mailman/listinfo/cisco-voip<BR><BR><br /><hr />HO HO HO, if you've been naughty this year, email Santa! <a href='http://asksanta.ca/?icid=SANTAENCA005' target='_new'>Visit asksanta.ca to learn more!</a></body>
</html>