<br><font size=2 face="sans-serif">Hi All.</font>
<br>
<br><font size=2 face="sans-serif">I implemented QOS on the LAN this weekend
in our shop. I configured 6 closets running a slew of 3750's and
four 6500 CAT switches (with a few 6x48 blades). I have one issue
so far. I'm sniffing one of the Call Manager interfaces on the switch
and all packets coming into the CallManager seem to have the correct COS
assigned. All of the packets sourced by CallManager are COS = 0.
This makes it look like CallManager is changing these packets to
0. Did I miss something on CallManager that I need to enable?
The clusterwide parameters (System - QOS) under Service Parameters is set
to Normal Priority, EF, AF41 and CS3. </font>
<br>
<br><font size=2 face="sans-serif">Running CallManager 4.1.3sr5d</font>
<br>
<br><font size=2 face="sans-serif">Thanks,</font>
<br><font size=2 face="sans-serif"><br>
Steve Siltman<br>
Assurant Corporate Technology<br>
Work: 651-361-4752<br>
Cell: 651-336-5563<br>
steve.siltman@assurant.com</font>
<P>
<HR>
This e-mail message and all attachments transmitted with it may contain legally
privileged and/or confidential information intended solely for the use of the
addressee(s). If the reader of this message is not the intended recipient, you
are hereby notified that any reading, dissemination, distribution, copying,
forwarding or other use of this message or its attachments is strictly
prohibited. If you have received this message in error, please notify the sender
immediately and delete this message and all copies and backups thereof.</P>
<P>Thank you.<BR>
<HR>
<P></P>