<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
You have to have max=2 to be able to conference or transfer. You can
keep busy=1, but must have max > 1. /wes<br>
<br>
wayne jackson wrote:
<blockquote cite="mid:BAY122-W374253B202A8D655723B0BAA620@phx.gbl"
type="cite">
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</style><font face="Helv" size="2">
I have several VG224 working on MGCP with analogue Polycom`s conference
phones however we are unable to set up a conference call from the
actual phone, if I establish a call and then try to use the hookflash
to place the call on hold and then set up a conference it cuts the
original person off. The setting on CCM is max. 1 call which makes
sense with the current fault but I`m unable to increase it. The only
info. I`ve seen points to SCCP control of the VG`s if I need analogue
conference set up not MGCP - is this correct ?. - thanks<br>
</font>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a></pre>
</blockquote>
</body>
</html>