<br><font size=2 face="sans-serif">Hi</font>
<br>
<br><font size=2 face="sans-serif">We are using an H323 gw</font>
<br>
<br><font size=2 face="sans-serif">Yep configured as you mentioned, see
URL's below with screen print of </font><font size=2 face="Arial">Route
pattern, Rlist, Rgroup gateway config... remember this manual failover
worked fine when we were running v3.2</font>
<br>
<br><font size=2 face="Arial">Thanks</font>
<br>
<br><font size=2 face="sans-serif">http://tinypic.com/view.php?pic=6omybl2&s=1</font>
<br><font size=2 face="sans-serif">http://tinypic.com/view.php?pic=72gix5z&s=1</font>
<br><font size=2 face="sans-serif">http://tinypic.com/view.php?pic=6p9y3hd&s=1</font>
<br>
<br>
<br>
<br><font size=2 face="sans-serif"><br>
Sam<br>
----<br>
Sam Hall<br>
Robert Wiseman & Sons<br>
Ext: 6655<br>
Tel: +44 (0)1355 270655<br>
samhall@wiseman-dairies.co.uk<br>
www.wiseman-dairies.co.uk<br>
159 Glasgow Road, East Kilbride, Glasgow, G74 4PA</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>"Erik Erasmus (E)"
<ErasmuE4@telkom.co.za></b> </font>
<p><font size=1 face="sans-serif">20/12/2007 10:32</font>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif">"Sam Hall" <SamHall@wiseman-dairies.co.uk>,
<cisco-voip@puck.nether.net></font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">RE: [cisco-voip] Call Manager router
failover</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=2 face="Arial">Hi Sam</font>
<br><font size=3> </font>
<br><font size=2 face="Arial">I have a setup with two voicegateways both
with two PRIs for rdundancy at a site and they work fine using 4-2-3 sr3x</font>
<br><font size=3> </font>
<br><font size=2 face="Arial">we don't swop manual - not sure if this is
part of the problem - should not be</font>
<br><font size=3> </font>
<br><font size=2 face="Arial">I am using Route pattern, Rlist, Rgroup gateway</font>
<br><font size=3> </font>
<br><font size=2 face="Arial">are you suing h323 or MGCP gateways </font>
<br><font size=3> </font>
<br><font size=3> </font>
<br><font size=2 face="Arial">erik erasmus </font>
<br><font size=3><br>
</font>
<hr><font size=2 face="Tahoma"><b>From:</b> cisco-voip-bounces@puck.nether.net
on behalf of Sam Hall<b><br>
Sent:</b> Thu 2007-12-20 12:06<b><br>
To:</b> cisco-voip@puck.nether.net<b><br>
Subject:</b> [cisco-voip] Call Manager router failover</font><font size=3><br>
</font>
<br><font size=2 face="sans-serif"><br>
Hi </font><font size=3><br>
</font><font size=2 face="Arial"><br>
We have two routers at each of our sites, one has our WAN connection "xx-2651-1",
the other has our ISDN30 "xx-2651-2". If our ISDN 30 router
hardware fails, we physically move the ISDN 30 cable from "xx-2651-2"
to "xx-2651-1". In CM 3.2 this automagically worked as
we have both routers configured in CM's "Route Group config".</font><font size=3>
<br>
</font><font size=2 face="Arial"><br>
Now in CM 4.2(3) after an upgrade this doesn't seem to work any more; the
only way to get this to work is to manually move the cable and then swap
the priority of the two selected devices in CM's "Route Group config",
then all calls route in and out as expected.</font><font size=3> <br>
</font><font size=2 face="Arial"><br>
If we don't swap the priority the below happens: </font><font size=3><br>
</font><font size=2 face="Arial"><br>
1) external > inbound are accepted and routed as normal</font><font size=3>
</font><font size=2 face="Arial"><br>
2) internal > internal are accepted and routed as normal</font><font size=3>
</font><font size=2 face="Arial"><br>
3) internal > external get an engaged tone</font><font size=3> </font><font size=2 face="Arial"><br>
4) "csim start" simulated calls from the router i.e internal
> external work fine as well</font><font size=3> <br>
</font><font size=2 face="Arial"><br>
Any ideas would be appreciated.</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
<br>
Sam<br>
----<br>
Sam Hall<br>
Robert Wiseman & Sons<br>
Ext: 6655<br>
Tel: +44 (0)1355 270655<br>
samhall@wiseman-dairies.co.uk<br>
www.wiseman-dairies.co.uk<br>
159 Glasgow Road, East Kilbride, Glasgow, G74 4PA</font><font size=3> </font>
<p><font size=3> </font>
<p><font size=2>*********************************************************************************</font>
<p><font size=2>Disclaimer: This electronic mail, together with any attachments,
is for the exclusive and confidential use of the recipient addressee. Any
other distribution, use or reproduction without our prior consent is unauthorised
and strictly prohibited. If you have received this message in error, please
delete it immediately and contact the sender directly or the Robert Wiseman
& Sons Ltd IT Helpdesk on +44 (0)1355 270634. Any views or opinions
expressed in this message are those of the author and do not necessarily
represent those of Robert Wiseman & Sons Ltd or of any of its associated
companies. No reliance may be placed on this message without written confirmation
from an authorised representative of the company.</font>
<p><font size=3> </font>
<p><font size=2>Robert Wiseman & Sons Limited reserves the right to
monitor all e-mail communications through its network.</font>
<p><font size=3> </font>
<p><font size=2>This message has been checked for viruses but the recipient
is strongly advised to re-scan the message before opening any attachments
or attached executable files.</font>
<p><font size=3> </font>
<p><font size=2>ROBERT WISEMAN & SONS LIMITED</font>
<p><font size=2><b>Registered Number: 87376 Scotland</b></font>
<p><font size=2><b>Registered Office: 159 Glasgow Road,</b></font>
<p><font size=2><b>East Kilbride, Glasgow, G74 4PA</b></font>
<p><font size=3> </font>
<p><font size=2>********************************************************************************</font>
<p>
<table width=100%>
<tr>
<td width=100% bgcolor=white><font size=3>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<br>
This e-mail is subject to the Telkom SA electronic communication legal
notice, available at :<br>
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF<br>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</font></table>
<br>
<br>