Hi<br><br>I need to convert a few FXS ports on a 2821 router&#39;s EVM-HD module from MGCP to SCCP this evening.&nbsp; I&#39;m doing the CCM configuration now in preparation for the router changes after hours.&nbsp; When I add the gateway in CCM Administration and specify EVM-HD module in Slot 2 I&#39;m given three&nbsp; subunit menus.&nbsp; For subunit 0 I choose EVM-HD 8FXS-DID and that gives me port 2/0/0 through 2/0/7.&nbsp; In subunit 1 I choose EM-HDA-8FXS and that gives me ports 2/1/0 through 2/1/7.&nbsp; The problem is these ports are number 2/0/8 through 2/0/15 on the router.&nbsp; I&#39;m guessing this won&#39;t work when the ports try to register.&nbsp; 
<br><br>Has anyone else come across this before?&nbsp; I&#39;m using CM 5.1.2.&nbsp; <br><br>thanks in advance<br clear="all"><br>-- <br>kris seraphine