<div>Hey Jason,</div>
<div> </div>
<div>Used RTMT like you suggested and found the problem. The reason for the "8081" was because I had on the GW RightFax PRI config to only accept 4 digits from the RF server. I configured the RF to send all digits, which obviously is normal. That was my screw up, I changed it to "ALL" and outbound faxes tested fine.
</div>
<div> </div>
<div>Thanks again, you just saved me several hours of troubleshooting.</div>
<div> </div>
<div>Joel P.</div>
<div> </div>
<div><br><br> </div>
<div><span class="gmail_quote">On 1/7/08, <b class="gmail_sendername">Joel Perez</b> <<a href="mailto:tman701@gmail.com">tman701@gmail.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>Im gonna try RTMT now. Thanks for the suggestion, i totally forgot about it.</div>
<div> </div>
<div>Joel P<br><br> </div>
<div><span class="e" id="q_11755b2ecefff036_1">
<div><span class="gmail_quote">On 1/7/08, <b class="gmail_sendername">Jason Aarons (US)</b> <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:jason.aarons@us.didata.com" target="_blank">jason.aarons@us.didata.com
</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div lang="EN-US" vlink="purple" link="blue">
<div>
<p><span style="FONT-SIZE: 11pt; COLOR: #1f497d">Check it with Dialed Number Analyzer, also check your CSS. Then you need to look at CCM traces via RTMT and the Triple Combo Parser </span><a onclick="return top.js.OpenExtLink(window,event,this)" href="http://www.employees.org/~tiryaki/tc/" target="_blank">
http://www.employees.org/~tiryaki/tc/</a></p>
<p><span style="FONT-SIZE: 11pt; COLOR: #1f497d"> </span></p>
<p><span style="FONT-SIZE: 11pt; COLOR: #1f497d"> </span></p>
<p><span style="FONT-SIZE: 11pt; COLOR: #1f497d">I spent a long time troubleshooting another fax PRI only to find PRI didn't show registered in CallManager CCMAdmin.</span></p>
<p><span style="FONT-SIZE: 11pt; COLOR: #1f497d"> </span></p>
<div style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: #b5c4df 1pt solid; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 3pt; BORDER-BOTTOM: medium none">
<p><b><span style="FONT-SIZE: 10pt">From:</span></b><span style="FONT-SIZE: 10pt"> <a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net
</a>[mailto:<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Joel Perez<br><b>Sent:</b>
Monday, January 07, 2008 2:00 PM<br><b>To:</b> <a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><b>Subject:</b> [cisco-voip] RightFax Outbound Dialing
</span></p></div>
<div><span>
<p> </p>
<div>
<p>Hey Guys,</p></div>
<div>
<p> </p></div>
<div>
<p>Here I go with another RightFax question.</p></div>
<div>
<p>I have searched the archives all the way back to Jan of 06. I didnt find a similar question as mine so I am turning to the list.</p></div>
<div>
<p>Also RightFax tech support isnt being very cooperative.</p></div>
<div>
<p>Basically I have RightFax up and running.</p></div>
<div>
<p>My setup consists of a RightFax server with a Brooktrout ISDN card. I have CuCM 5.1 and a 2851 with two PRI's from the telco and a 3rd PRi for the RightFax. No T38 is configured anywhere. All 3 PRi's are MGCP controlled.
</p></div>
<div>
<p>The call flow is voice/Fax calls come in from the Telco on the first 2 Pri's. I have route patterns in CUCM to send the Fax calls to the RightFax PRI. That works as it should. Users get their faxes and so far none of them are cut halfway thru or anything. They are fine with that.
</p></div>
<div>
<p>The problem is that no outbound faxes are working. The call isnt even handed off to the Telco PRI's. </p></div>
<div>
<p>I can see in the debugs that the calls seize a channel on the correct PRI but that is it. I get the following:</p></div>
<div>
<p> </p></div>
<div>
<p>Jan 7 16:32:21.403: ISDN Se0/1/1:23 Q931: RX <- SETUP pd = 8 callref = 0x0001</p></div>
<div>
<p> Bearer Capability i = 0x9090A2<br> Standard = CCITT<br> Transfer Capability = 3.1kHz Audio<br> Transfer Mode = Circuit<br> Transfer Rate = 64 kbit/s<br> Channel ID i = 0xA98382
<br> Exclusive, Channel 2<br> Called Party Number i = 0x80, '99546439082'<br> Plan:Unknown, Type:Unknown<br>Jan 7 16:32:21.411: ISDN Se0/1/1:23 Q931: TX -> RELEASE_COMP pd = 8 callref =
<br>0x8001<br> Cause i = 0x8081 - Unallocated/unassigned number</p>
<p>Why is it giving me "Unallocated/Unassigned number" when I have route patterns that match what is being dialed. Another odd thing i saw is that there is no calling # in the debug. I have tried to have RightFax prefix the 9, I have tried it manually and I get the same debug output. At this point Im lost as to why CUCM is rejecting the call.
</p>
<p>Thanks for any help you guys can provide.</p>
<p>Joel P</p></div></span></div></div></div>
<div>
<p>
<hr size="1">
<p></p>
<p><strong>Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
</strong></p>
<p></p></p></div></blockquote></div><br></span></div></blockquote></div><br>