<div>Okay so this is a newbie question, but I can't seem to find the answer.</div>
<div> </div>
<div>I have an MGCP Gateway on a 2811 </div>
<div>this is a small 5 person office so they have an Ethernet module on the router. (NM-16ESW) with a power card (PPWR-DCARD-16ESW).</div>
<div> </div>
<div>This weekend I tried to cut over the site and I can't get power to the phones.</div>
<div> </div>
<div>the Config looks like this:</div>
<div> </div>
<div>Interface FastEthernet1/1</div>
<div>decription Sue's Phone and PC</div>
<div>switchport access Vlan 4</div>
<div>switchport voice vlan 3</div>
<div>duplex full</div>
<div>speed 100</div>
<div>power inline auto </div>
<div>mls qos cos override</div>
<div>spanning-tree portfast</div>
<div> </div>
<div>according to the router my options are power inline (auto, never). Do I need cdp enabled on the port to detect the phone? How do I get power to the phones?</div>
<div> </div>
<div>Much appreciated</div>
<div> </div>
<div>Kevin Dunn </div>