Dear Justin,<br><div class="gmail_quote"><br>Thanks for further assistance. I have solved my issue using trunk-group feature. e.g.<br><br>Controller E1 1/1<br>pri-group timeslot 1-31<br>trunk-group sub timeslot 1-28<br>trunk-group opr timeslot 29-31<br>
<div class="gmail_quote"><div><br>But i will also try your method in testing. thanks again.<br><br>Regards<br><br> </div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
---------- Forwarded message ----------<br>From: "Ramiz Sardar" <<a href="mailto:ramizchaudhary@gmail.com" target="_blank">ramizchaudhary@gmail.com</a>><br>To: "Justin Steinberg" <<a href="mailto:jsteinberg@gmail.com" target="_blank">jsteinberg@gmail.com</a>><br>
Date: Wed, 23 Jan 2008 16:33:23 +0500<br>Subject: Re: [cisco-voip] Grouping PRI Channels<br><br>Dear Justin,<br><br>Thanks for your responses.Please assist me in configuration. My old configuration for E1 Pri was below:<br>
<br>isdn switch-type primary-qsig<br><br>Controller E1 1/1<br>pri-group timeslot 1-31<br><br>
so now tell me what would be the new configuration using ds0-group and what would be the TYPE since the syntex of command is<br><br>ds0-group ds0-group-no timeslots timeslot-list type {e&m-delay-dial | e&m-immediate-start | e&m-melcas-delay | e&m-melcas-immed | e&m-melcas-wink | e&m-wink-start | ext-sig | fgd-eana | fxo-ground-start | fxo-loop-start | fxo-melcas | fxs-ground-start | fxs-loop-start | fxs-melcas | r2-analog | r2-digital | r2-pulse}
<br><br>Waiting for your kind assistance<br><br>Best Regards<br><br><div class="gmail_quote">On Jan 21, 2008 7:04 PM, Justin Steinberg <<a href="mailto:jsteinberg@gmail.com" target="_blank">jsteinberg@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Here is one way.<br><br>create two ds0 groups on your routers (one for channels 1-18 and the<br>other for 19-31). You will need to prefix digits to the incoming call<br>with a routing code that identifies which ds0 group originated the
<br>call. Send the call from router A to router B with the routing digits<br>added to the called party number. When the call arrives at Router B<br>you can use destination patterns to match the routing code so you can<br>
send it to the correct channel. Strip the routing code between router<br>B and pbx B.<br><div><div></div><div><br>On Jan 21, 2008 8:15 AM, Ramiz Sardar <<a href="mailto:ramizchaudhary@gmail.com" target="_blank">ramizchaudhary@gmail.com
</a>> wrote:<br>> Friends,<br>><br>> I am working on voip setup where Ericsson PBXs are connected with cisco 3800<br>> routers. You can see topology below:<br>><br>> Phones-------PBX-A----Router-A-------------------------Router-B------PBX-B--------Phones
<br>><br>> PBX is connected with router through E1 Pri (qsiq) where as Router are<br>> connected via E1 link.<br>><br>> Issue is: before voip setup PBXs are connected point to point and TDM<br>> engineer divided channels in to two groups. One from channel 1-18 for
<br>> subscribers and other from 19-31 for Operators. So when subscriber come on<br>> trunk, it was assigned channel from 1-18 and operators are assigned channel<br>> from its range. Now i put routers between PBXs so when operator of PBX-A try
<br>> to dial number, operator is assigned channel from its range on PBX-A and<br>> forward to Router-A. When that call reaches Router-B, it assign first<br>> available channel on pri that is connected with PBX-B. But we want channels
<br>> are assigned by Router-B must be same that assigned by PBX-A.<br>><br>> Hope you will have understand my problem. And please tell me the<br>> solution.......You immediate response will be appreciated.<br>
><br>> Best Regards<br>> Rameez<br>><br></div></div>> _______________________________________________<br>> cisco-voip mailing list<br>> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net
</a><br>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>><br></blockquote></div><br>
<br></blockquote></div><br>
<br></div><br>