<br><font size=2 face="sans-serif">Sorry, meant to include that......This
is a 3845 Router running 12.4(3h). I'll check the bug ID's. I
also have a TAC case open and the engineer just responded saying that he
hasn't found anything in my version yet.</font>
<br>
<br><font size=2 face="sans-serif">Carlos</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>Wes Sisk <wsisk@cisco.com></b>
</font>
<p><font size=1 face="sans-serif">01/29/2008 02:19 PM</font>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif">CarlosOrtiz@bayviewfinancial.com</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td><font size=1 face="sans-serif">cisco-voip@puck.nether.net</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [cisco-voip] T1 PRI stuck channel</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=3>what platform and version? looks like several candidates:
CSCdz53326, CSCef68941, CSCsd05492<br>
<br>
/Wes<br>
</font><font size=3 color=blue><u><br>
</u></font><a href=mailto:CarlosOrtiz@bayviewfinancial.com><font size=3 color=blue><u>CarlosOrtiz@bayviewfinancial.com</u></font></a><font size=3>
wrote: </font>
<br><font size=2 face="sans-serif"><br>
We had a location with a PRI experience an issue yesterday. Layer
1-3 status was good. It appears that the 1st B channel was in a stuck
state. Inbound and outbound calls were both set up to use low to
high channels. After running the "show voice call summary" I
would see the following output and the status would not change.</font><font size=3>
<br>
</font><font size=2 color=red face="sans-serif"><b><br>
PORT CODEC VAD VTSP STATE
VPM STATE</b></font><font size=3>
</font><font size=2 color=red face="sans-serif"><b><br>
============== ======== === ==================== ======================</b></font><font size=3>
</font><font size=2 color=red face="sans-serif"><b><br>
0/0/1:23.1 g711ulaw n S_WAIT_STATS
S_TSP_WAIT_RELEASE </b> </font><font size=3>
<br>
<br>
</font><font size=2 face="sans-serif"><br>
After changing outbound calls to high to low the outbound calls started
working again. This lead me to believe that there was some kind of
hardware/DSP or software issue. I tried a shut no shut on the voice
port and the controller but that did not fix the inbound problem. A
reboot did fix the issue.</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
Anyone seen something similar?</font><font size=3> <br>
</font><font size=2 face="sans-serif"><br>
Carlos</font><font size=3> </font>
<br><font size=3><tt><br>
</tt></font>
<hr><font size=3><tt><br>
_______________________________________________<br>
cisco-voip mailing list<br>
</tt></font><a href="mailto:cisco-voip@puck.nether.net"><font size=3 color=blue><tt><u>cisco-voip@puck.nether.net</u></tt></font></a><font size=3><tt><br>
</tt></font><a href="https://puck.nether.net/mailman/listinfo/cisco-voip"><font size=3 color=blue><tt><u>https://puck.nether.net/mailman/listinfo/cisco-voip</u></tt></font></a><font size=3><tt><br>
</tt></font>
<br>