<div>Most outside world stuff it's a lot easier to run H323 with Gatekeepers. we have a state wide network that we do all our VC over IP. if it's out of state we use our Regional Hub to bridge the IP / ISDN. Depending on weather you want to do three way or better conferencing and don't have a service provider that can you it for you.... you may look at the cuvc or radvision or there are a couple others I'm forgetting right now. Tandbergs do have a three way bridge build in if you want to use that.</div>
<div> </div>
<div>Scott<br><br></div>
<div class="gmail_quote">On Jan 30, 2008 7:30 AM, Robert Kulagowski <<a href="mailto:rkulagow@gmail.com">rkulagow@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div class="Ih2E3d">Matthew Saskin wrote:<br>> Ditto that for the Polycom's. If I recall correctly, the polycom H.323<br>> load also has the ability for it to route outbound calls via the<br>> CallManager, so that a gatekeeper isn't necessary.<br>
><br>> For the easiest integration with either vendor, just order the endpoint<br>> with the SCCP load on it. From there, they have a plugin you run on the<br>> CallManager to load the new device type, then when you go to add a phone<br>
> you'll have a new phone type of Tandberg Video Endpoint (for example).<br><br></div>How complicated does it get once you need to talk to the outside world<br>though? If I have a SCCP endpoint connected via ethernet and haven't<br>
pulled a PRI to the endpoint, then I'm assuming that this is where<br>devices like the CUVC 3545 comes into play? In CM, is it just<br>configured as a MGCP gateway?<br>
<div>
<div></div>
<div class="Wj3C7c">_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div></div></blockquote></div><br>