<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.3243" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><A
href="http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml">http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml</A></FONT></DIV>
<DIV> </DIV><!-- Converted from text/plain format -->
<P><FONT size=2>-Ryan </FONT></P>
<DIV> </DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>SR
IRWMA<BR><B>Sent:</B> Friday, February 01, 2008 4:25 AM<BR><B>To:</B>
cisco-voip@puck.nether.net<BR><B>Subject:</B> [cisco-voip] Port Selection Based
On Calling Number<BR></FONT><BR></DIV>
<DIV></DIV><SPAN class=gmail_quote><BR></SPAN>
<DIV> Friends,<BR><BR>I have connected two routers with pbxs through pri.
Router A is connect with PBX1 through 2 PRI (in router it shows port 1/0:15 for
first PRI and port 1/1:15 for second PRI. You can see my topology below:
<BR><BR><BR>Phone(2001)-------PBX1------(2PRI)-----Router1-----------Router2-----(1PRI)-------PBX2-------Phones
(3001,5001)<BR><BR>I need to do so that if Phone 3001 of PBX2 call phone 2001 of
PBX1 then router1 forward call on PRI port 1/0:15 but if Phone 5001 call the
same Phone 2001 then router1 forward call on second port 1/1:15.<BR><BR>I tried
number of combinations of destination-patern, incoming called-number and
answer-address but couldn't acheive the results. I need your help...</DIV>
<DIV> </DIV>
<DIV>Best Regards</DIV></BODY></HTML>