<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.3243" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=703442314-01022008><FONT face=Arial
color=#0000ff size=2>I think what you'll need to do is set a dialed-number
translation to prefix some digit(s) on the inbound dial-peer. Then use
this prefix to route the call out the specific outbound dial-peer on the other
side, where you can strip the prefix before sending the call out to the
PBX.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=703442314-01022008><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=703442314-01022008><FONT face=Arial
color=#0000ff size=2>This doc does basically the same thing except based on
calling party. It can easily be adjust to use the calling
port.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=703442314-01022008><FONT face=Arial
color=#0000ff size=2><A
href="http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml">http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml</A></FONT></SPAN></DIV>
<DIV> </DIV><!-- Converted from text/plain format -->
<P><FONT size=2>-Ryan </FONT></P>
<DIV> </DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Ramiz
Sardar<BR><B>Sent:</B> Friday, February 01, 2008 2:20 AM<BR><B>To:</B>
cisco-voip<BR><B>Subject:</B> Re: [cisco-voip] Same Trunk on Both
Side<BR></FONT><BR></DIV>
<DIV></DIV>Still Waiting.......<BR><BR>
<DIV class=gmail_quote>On Jan 31, 2008 9:04 PM, Ramiz Sardar <<A
href="mailto:ramizchaudhary@gmail.com">ramizchaudhary@gmail.com</A>>
wrote:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">Friends,<BR><BR>I
am currently working on voip setup. My topology you can see
below:<BR><BR>PhoneA----- PBX 1----------(2
PRI)-------Router1-----------Router2------(2
PRI)---PBX2---------PhoneB<BR><BR>As you can see that Routers are connect with
PBXs through 2 E1 PRIs. I want to make configuration so that if a call come
from first pri (trunk) on Router 1, on Router2 it most go on first pri
(trunk) that is connect to PBX2 and same for second pri. Means If i recieve
call from PBX1 on port 1/0:15 then i could tag it some how and and Router 2
recieve that call, it send it you its port 1/0:15 and same for second port
1/1:15 on both side. Tell me the way how can i do that.<BR><BR>Waiting for
positive immediate response..<BR><BR>Best
Regards<BR></BLOCKQUOTE></DIV><BR></BODY></HTML>