<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
danger - CM4.x and earlier does not do data validation at the database
level. data is only validated via admin and axl interfaces.<br>
<br>
net result to you: the system does not protect itself from dangerous
changes performed via direct SQL update. it allows you to
insert/modify data that can have dire consequences. While this is
possible, it is dangerous and is not user friendly. Always take a
backup and be prepared to restore from backup when performing any
direct database update.<br>
<br>
/wes<br>
<br>
Matthew Saskin wrote:
<blockquote cite="mid:47B50FAF.5050907@saskin.net" type="cite">
<pre wrap="">Look in the CCM03xx database at the NumPlan table:
calling number mask = CallingPartyTransformationMask field
can't think (off the top of my head) of what you're referring to by the
use phone check box.
-matt
Jim McBurnett wrote:
</pre>
<blockquote type="cite">
<pre wrap="">The calling number mask and the use phone check box.
I should have said- CCM Route patterns…
For some reason I have a bad habit to call route patterns dial peers..
Jim
* From: * Lelio Fulgenzi [<a class="moz-txt-link-freetext" href="mailto:lelio@uoguelph.ca">mailto:lelio@uoguelph.ca</a>]
*Sent:* Thursday, February 14, 2008 7:47 PM
*To:* Jim McBurnett; Cisco Voice
*Subject:* Re: [cisco-voip] CCM dial peer changes.
what sort of changes do you have to make? i would probably use
something like awk to input the configs and output them with the
appropriate changes.
----- Original Message -----
* From: * Jim McBurnett <a class="moz-txt-link-rfc2396E" href="mailto:jim@tgasolutions.com"><mailto:jim@tgasolutions.com></a>
* To: * Cisco Voice <a class="moz-txt-link-rfc2396E" href="mailto:cisco-voip@puck.nether.net"><mailto:cisco-voip@puck.nether.net></a>
* Sent: * Thursday, February 14, 2008 7:39 PM
* Subject: * [cisco-voip] CCM dial peer changes.
Hey folks,
I need to make changes to about 110 out of about 200 dial peers.
Does anyone have a means to make the same change to them easily?
I have poked around in SQL2000 but it just is not making sense…
Someone on the list had a link or a tool but I can’t find it now…
Ideas?
Thanks,
Jim
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
<pre wrap=""><!---->
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
</body>
</html>