<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
depending on your codec complexity, FLEX, etc.<br>
<br>
Jonathan Charles wrote:
<blockquote
cite="mid:5d093f9a0802210855w70f7f9a9oabd5ee94198ab867@mail.gmail.com"
type="cite">
<pre wrap="">If the DSPs are not in use, then they are free for other uses... the
E1 should use 30 channels, leaving you 34 for Conferencing... in
theory...
Jonathan
On Thu, Feb 21, 2008 at 10:51 AM, Aman Chugh <a class="moz-txt-link-rfc2396E" href="mailto:aman.chugh@gmail.com"><aman.chugh@gmail.com></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">just to add to this what should happen in the following scenario, I have a
router with VWIC 1MFT1/E1 and PVD2-64 , I am going to use it for a E1 port
and want to use the remaining DSPS for conferencing, I will be configuring
the E1 first and then the conferencing, would the remaining DSPs available
for conferencing after I configure the E1 port.
Thanks,
Aman
On 2/21/08, Jonathan Charles <a class="moz-txt-link-rfc2396E" href="mailto:jonvoip@gmail.com"><jonvoip@gmail.com></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">OK... cool.
Thanks
Jonathan
On Thu, Feb 21, 2008 at 10:39 AM, Voice Noob <a class="moz-txt-link-rfc2396E" href="mailto:voicenoob@gmail.com"><voicenoob@gmail.com></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">You can shutdown all 8 ports and then REBOOT the router. It allocates
</pre>
</blockquote>
</blockquote>
<pre wrap="">DSP's
</pre>
<blockquote type="cite">
<blockquote type="cite">
<pre wrap="">for the FXO's on startup.
On Thu, Feb 21, 2008 at 10:22 AM, Jonathan Charles <a class="moz-txt-link-rfc2396E" href="mailto:jonvoip@gmail.com"><jonvoip@gmail.com></a>
wrote:
</pre>
<blockquote type="cite">
<pre wrap="">
I have a router with 24 channels (a 16 and an 8) and 2 4-port FXO
cards... we are enabling a PRI tomorrow...
Can I just shut down the FXOs or do I need to pull the cards to free
up the DSPs?
Jonathan
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap="">_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
<pre wrap=""><!---->_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
</body>
</html>