<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Joseph,<br>
<br>
Actually 'voip ccapi inout' may not be a good idea on a gateway of your
scale. At this point I'd say open a TAC case for more granular
investigation.<br>
<br>
/Wes<br>
<br>
Wes Sisk wrote:
<blockquote cite="mid:47D81350.8010705@cisco.com" type="cite">
<pre wrap="">Hi Jospeh,
Yep, that was misread on my part, no COR. Sorry. Need to see the debug
voip ccapi inout and config for the voice port.
/wes
Joseph Mays wrote:
</pre>
<blockquote type="cite">
<pre wrap="">There do not seem to be any corlists defined.
nas01#show run | include cor
calltracker call-record terse
spe call-record modem
dial-peer cor custom
nas01#show run | include custom
resource-pool profile customer Greenwood
resource-pool profile customer Hackett
resource-pool profile customer Fax
resource-pool profile customer NullDNIS
resource-pool profile customer interoffice
dial-peer cor custom
nas01#
----- Original Message ----- From: "Wes Sisk" <a class="moz-txt-link-rfc2396E" href="mailto:wsisk@cisco.com"><wsisk@cisco.com></a>
To: "Joseph Mays" <a class="moz-txt-link-rfc2396E" href="mailto:mays@win.net"><mays@win.net></a>
Cc: <a class="moz-txt-link-rfc2396E" href="mailto:cisco-voip@puck.nether.net"><cisco-voip@puck.nether.net></a>
Sent: Wednesday, March 12, 2008 12:16 PM
Subject: Re: [cisco-voip] Cisco Channel Usage question
</pre>
<blockquote type="cite">
<pre wrap="">I see you have a COR list applied. Is the incoming peer/outgoing
peer permitted by the COR?
/Wes
Joseph Mays wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Wes --
</pre>
<blockquote type="cite">
<pre wrap=""> 'show dial-plan number 8009466382' on the router to see what you get.
other useful debugs:
debug voip ccapi inout
</pre>
</blockquote>
<pre wrap="">Thanks for the input. I was using debug voip ccapi inout before, but
didn't try it in this latest event. I'll give it a shot. I included
the output of 'show dial-plan number 8009466382' in my initial
posting to the list, but I'll put it in again here --
nas01#show dialplan number 8009466382
Macro Exp.: 8009466382
VoiceEncapPeer8800
peer type = voice, information type = voice,
description = `',
tag = 8800, destination-pattern = `800.......',
answer-address = `', preference=0,
CLID Restriction = None
CLID Network Number = `'
CLID Second Number sent
source carrier-id = `', target carrier-id = `',
source trunk-group-label = `', target trunk-group-label = `',
numbering Type = `unknown'
group = 8800, Admin state is up, Operation state is up,
incoming called-number = `', connections/maximum = 0/unlimited,
DTMF Relay = disabled,
huntstop = disabled,
in bound application associated: 'DEFAULT'
out bound application associated: ''
dnis-map =
permission :both
incoming COR list:maximum capability
outgoing COR list:minimum requirement
Translation profile (Incoming):
Translation profile (Outgoing):
incoming call blocking:
translation-profile = `'
disconnect-cause = `no-service'
type = pots, prefix = `',
forward-digits default
session-target = `', voice-port = `1/0:5:0',
direct-inward-dial = disabled,
digit_strip = disabled,
register E.164 number with GK = TRUE
fax rate = system, payload size = 20 bytes
Time elapsed since last clearing of voice call statistics never
Connect Time = 0, Charged Units = 0,
Successful Calls = 2, Failed Calls = 0, Incomplete Calls = 0
Accepted Calls = 0, Refused Calls = 0,
Last Disconnect Cause is "10 ",
Last Disconnect Text is "normal call clearing (16)",
Last Setup Time = 92636869.
Matched: 8009466382 Digits: 3
Target:
nas01#
</pre>
</blockquote>
</blockquote>
</blockquote>
<pre wrap=""><!---->_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
</body>
</html>