Greetings!<br><br>I'm not having any success hair pinning a DID off a PRI out an FXS port on an H.323 gateway. I see the q931 info the DID coming in, it is failing because of unallocated number. <br><br>setup: Branch office Cisco 2801 running 12.4(13e), 23 channel PRI in port 0/3/1:23, DID range 8675300 - 8675320, fax is 8675309, connected to FXS port 0/0/0. All other incoming and outgoing calls are functional.<br>
<br>My dialpeers:<br><br>dial-peer voice 3 pots<br> huntstop<br> destination-pattern 8675309<br> direct-inward-dial<br> port 0/0/0<br>!<br>dial-peer voice 100 voip<br> destination-pattern .T<br> progress_ind setup enable 3<br>
voice-class codec 1<br> session target ipv4:<a href="http://10.10.10.10">10.10.10.10</a><br> incoming called-number 86753..<br> dtmf-relay h245-alphanumeric<br>!<br>dial-peer voice 1 pots<br> destination-pattern 9T<br> progress_ind alert enable 8<br>
progress_ind progress enable 8<br> direct-inward-dial<br> port 0/3/1:23<br><br>I pulled all the dial-peers off except dial-peer 3. It would answer at that point, and return a dialtone, but I could not get it down the FXS hole. I tried adding preference to the dial-peers and altering the dial-peer hunt order to no avail. I have not found anything on cisco or other forums, but i am half blind /shrug.<br>
<br>Thanks in advance!<br>Edward<br>