<HTML dir=ltr><HEAD>
<META http-equiv=Content-Type content="text/html; charset=unicode">
<META content="MSHTML 6.00.2900.3314" name=GENERATOR></HEAD>
<BODY>
<DIV id=idOWAReplyText16694 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>Hello,</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>i´m trying to configure a bri port to work with a dialogic board fax server, and i never get answer from the fax server. Anyone has instaled already a solution like that ? can anyone tell me the proceding to do it ? My media gateway is working in MGCP, the bri port is configured only with the folowing:</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT size=2>
<P>interface BRI0/1/0</P>
<P>no ip address</P>
<P>isdn switch-type basic-net3</P>
<P>isdn protocol-emulate network</P>
<P>isdn layer1-emulate network</P>
<P>isdn incoming-voice voice</P>
<P>isdn bind-l3 ccm-manager service mgcp</P>
<P>isdn send-alerting</P>
<P>isdn static-tei 0</P>
<P>isdn skipsend-idverify</P>
<P>the voice port config is:</P><FONT size=2>
<P>voice-port 0/1/0</P>
<P>compand-type a-law</P>
<P>cptone PT</P></FONT>
<P>and the dial-peer configuration is:</P><FONT size=2>
<P>dial-peer voice 10 pots</P>
<P>description Liga Fax Server</P>
<P>destination-pattern 610T</P>
<P>direct-inward-dial</P>
<P>port 0/1/0</P>
<P>forward-digits all</P>
<P>and at last the mgcp is configured as follows:</P>
<P>mgcp<BR>mgcp call-agent 10.101.128.253 2427 service-type mgcp version 0.1<BR>mgcp dtmf-relay voip codec all mode out-of-band<BR>mgcp rtp unreachable timeout 1000 action notify<BR>mgcp modem passthrough voip mode nse<BR>mgcp sgcp disconnect notify<BR>mgcp sgcp restart notify<BR>mgcp package-capability rtp-package<BR>mgcp package-capability sst-package<BR>mgcp package-capability pre-package<BR>mgcp default-package line-package<BR>no mgcp package-capability res-package<BR>no mgcp package-capability fxr-package<BR>no mgcp timer receive-rtcp<BR>mgcp sdp simple<BR>mgcp validate domain-name<BR>mgcp rtp payload-type g726r16 static<BR>!<BR>mgcp profile default</P>
<P> </P>
<P>any ideas / sugestions about my configuration ?</P>
<P> </P>
<P>Thanks,</P></FONT>
<P></FONT>Pedro </P></DIV></DIV></BODY></HTML>