<br><div class="gmail_quote"><br>Hi <br>We got a E1 interface connected to a ISDN onramp-10 service. We identified a lot of slip secs on the E1 interface which caused the fax fails.< network-clock-participate
wic 1> and <span><network-clock-select 1 E1 0/1/0> commands are already configured on the voice gateway. Had the carrier did a remote loopback test(they did the test without attending the site, I don't know how they did the test) and they advised the service is fine.<br>
Any ideas what the problem would be?<br><br>Thanks a lot.<br><br><br>#sh controller e1<br>E1 0/1/0 is up.<br> Applique type is Channelized E1 - balanced<br> Description: Link to Onramp10<br> No alarms detected.<br> alarm-trigger is not set<br>
Version info Firmware: 20051006, FPGA: 20, spm_count = 0<br> Framing is CRC4(Australia), Line Code is HDB3, Clock Source is Line.<br> CRC Threshold is 320. Reported from firmware is 320.<br> Data in current interval (568 seconds elapsed):<br>
0 Line Code Violations, 0 Path Code Violations<br> 51 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins<br> 51 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs<br> Total Data (last 24 hours)<br>
0 Line Code Violations, 0 Path Code Violations,<br> 7856 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,<br> 7856 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs<br><br></span>
<br></div><br>