<table cellspacing='0' cellpadding='0' border='0' ><tr><td valign='top' style='font: inherit;'>well , you can acheive this by making a translation pattern that strips 9 then match a dial-peer of incoming called of .T.<br><br>--- On <b>Mon, 7/7/08, Jonathan Charles <i><jonvoip@gmail.com></i></b> wrote:<br><blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">From: Jonathan Charles <jonvoip@gmail.com><br>Subject: Re: [cisco-voip] CME: Remove "9" from Phone Display for PSTN Calls<br>To: "Ramiz Sardar" <ramizchaudhary@gmail.com><br>Cc: "cisco-voip" <cisco-voip@puck.nether.net><br>Date: Monday, July 7, 2008, 1:18 AM<br><br><pre>well, secondary-dialtone 9 will get you your tone...<br><br>But when a dial-peer is matched, the sent digits should display on the<br>phone... at least this is what I have seen on CCM when it sends a call<br>to an H.323 gateway (however, CCM is probably removing the
9...)<br><br><br>Jonathan<br><br>On Mon, Jul 7, 2008 at 12:04 AM, Ramiz Sardar <ramizchaudhary@gmail.com><br>wrote:<br>> Hi,<br>><br>> I configured CME so that when someone dial 9, he will recieve an other<br>tone<br>> and then he can dial pstn number. Is there any way that when user dial 9,<br>he<br>> recieve the same other tone but 9 digit not display on phones screen just<br>> following digits display (pstn number).<br>><br>> Hoping for any solution<br>><br>> Best Regards<br>> Rameez<br>><br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>><br>><br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip</pre></blockquote></td></tr></table><br>