<table cellspacing='0' cellpadding='0' border='0' ><tr><td valign='top' style='font: inherit;'>very good document to solve FXO disconnect problem , you should understand this type of FXO Analog signalling to solve the problem<br><br>--- On <b>Mon, 7/7/08, Jonathan Charles <i><jonvoip@gmail.com></i></b> wrote:<br><blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">From: Jonathan Charles <jonvoip@gmail.com><br>Subject: Re: [cisco-voip] FXO disconnect problem - telco side?<br>To: "Tom Storey" <tom@snnap.net><br>Cc: "cisco-voip" <cisco-voip@puck.nether.net><br>Date: Monday, July 7, 2008, 8:53 AM<br><br><pre>http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml<br><br><br><br>Jonathan<br><br>On Mon, Jul 7, 2008 at 12:42 AM, Tom Storey <tom@snnap.net> wrote:<br>>> Do a debug voip vtsp all<br>>><br>>> You want to see a Power Denial
from telco<br>>><br>>> If you don't see that, they aren't sending it, so you<br>won't hang up....<br>><br>> Hi, thanks for your response.<br>><br>> Im pretty sure my end is hanging up. Im initiating the hangup via the<br>> analogue phone connected to my 1760, and the LEDs which indicate the line<br>> is in use on the FXO go out, which to me sounds like it has hung up.<br>><br>> Its just the telco that doesnt seem to realise that I have hung up and so<br>> they keep their end of the line off hook, or so it would seem.<br>><br>> Cheers,<br>> Tom<br>><br>><br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip</pre></blockquote></td></tr></table><br>