<br><font size=2 face="sans-serif">Hi All,</font>
<br>
<br><font size=2 face="sans-serif">I noticed that a couple of our remote
office routers Conference Bridge profiles were unregistered with Call Manager.
Taking a closer look, we are low on available DSP's. Doing
a show interface ser 0/1/0:15 on our international voice circuit, the bottom
of the display shows Timeslots(s) Used:16. Does this mean that this
is a fractional E1? I have pri-group timeslots 1-31 configured on
the controller E1.</font>
<br><font size=2 face="sans-serif">I changed the pri-group timeslots to
1-16 and was able to register the Conference Bridge profile after the DSP's
were freed up. Just wondering if I've taken away timeslots or not.
</font>
<br>
<br><font size=2 face="sans-serif">Our documentation on the international
sites doesn't show the voice circuit orders. I'm unable to tell how
the circuit was ordered and how many timeslots.</font>
<br>
<br><font size=2 face="sans-serif">Thanks,</font>
<br><font size=2 face="sans-serif"><br>
Steve Siltman<br>
Assurant Corporate Technology<br>
Network Engineer - Cisco CCVP<br>
Work: 651-361-4752<br>
Cell: 651-336-5563<br>
steve.siltman@assurant.com</font>
<P>
<HR>
This e-mail message and all attachments transmitted with it may contain legally
privileged and/or confidential information intended solely for the use of the
addressee(s). If the reader of this message is not the intended recipient, you
are hereby notified that any reading, dissemination, distribution, copying,
forwarding or other use of this message or its attachments is strictly
prohibited. If you have received this message in error, please notify the sender
immediately and delete this message and all copies and backups thereof.</P>
<P>Thank you.<BR>
<HR>
<P></P>