<div dir="ltr">Hey guys,<br><br>I'm having this same problem on an other 2801 with same FXO configuration but the problem here is that I don't get any debug output from the <b>debug vpm all</b> and as far as I can see the RL/RP/RGs are all configured correctly.<br>
<br>A <b>sh voice port sum </b>shows that the phone does not even go off-hook?<br><br>Can someone suggest some more troubleshooting suggestions.<br><br>Thanks.<br><br><div class="gmail_quote">2008/7/24 Mark J <span dir="ltr"><<a href="mailto:markju@gmail.com">markju@gmail.com</a>></span><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div dir="ltr">Thanks guys, tha did it, everything is working now!<br><br>Thank you very much for the help.<br>
<br><div class="gmail_quote">2008/7/24 Chris Clouse <<a href="mailto:Chris.Clouse@cdw.com" target="_blank">Chris.Clouse@cdw.com</a>>:<div><div></div><div class="Wj3C7c"><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">If a standard phone works, then you'll need to have them set as
loop-start. Give that a try and see how it goes.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Chris</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;">
<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On
Behalf Of </b>Mark J<br>
<b>Sent:</b> Wednesday, July 23, 2008 11:41 PM<br>
<b>To:</b> Joe Cisco<br>
<b>Cc:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> Re: [cisco-voip] CCM and FXO on 2801</span></p>
</div><div><div></div><div>
<p> </p>
<div>
<p style="margin-bottom: 12pt;">Hi Joe,<br>
<br>
I have connected a standard phone the the phone and tested and confirmed that
called can be made and that there is a dial tone....<br>
<br>
<br>
</p>
<div>
<p>2008/7/24 Joe Cisco <<a href="mailto:smetsysocsic@gmail.com" target="_blank">smetsysocsic@gmail.com</a>>:</p>
<p>I'm not a genius reading this,but from what I see, is it
possible that<br>
you configured the FXO ports as GROUND START when in fact the line is<br>
LOOP START? I've seen this same sort of thing happen where inbound<br>
will still work, but outbound won't if it isn't configured correctly.<br>
<br>
Another thing to try would be to put a butt set in line in MONITOR<br>
mode and listen to see if you can determine if dial tone is ever<br>
handed to the FXO port?<br>
<br>
Thanks,<br>
<br>
Joe C.</p>
<div>
<div>
<p><br>
On Wed, Jul 23, 2008 at 11:04 PM, Mark J <<a href="mailto:markju@gmail.com" target="_blank">markju@gmail.com</a>>
wrote:<br>
> Thanks Joe,<br>
><br>
> Here is the output:<br>
><br>
> *Jul 24 14:16:08.064 AEST: HTSP endpoint_info=aaln/S0/SU0/0, type=2,<br>
> under_specified=0,<br>
> service_type=2htsp_allocate_if:
MATCH!<br>
><br>
> *Jul 24 14:16:08.068 AEST: htsp_timer_stop3 htsp_setup_req<br>
> *Jul 24 14:16:08.072 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,<br>
> E_HTSP_SETUP_REQ]fxogs_onhook_setup<br>
> *Jul 24 14:16:08.072 AEST: [0/0/0] set signal state = 0x0 timestamp = 0<br>
> *Jul 24 14:16:08.072 AEST: dsp_set_sig_state: [0/0/0] packet_len=12<br>
> channel_id=128 packet_id=39 state=0x0 timestamp=0x0<br>
> *Jul 24 14:16:08.072 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 0,
65535,<br>
> 1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)<br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:08.072 AEST: htsp_timer - 10000 msec<br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:18.076 AEST: htsp_process_event: [0/0/0,<br>
> FXOGS_WAIT_TIP_GROUND, E_HTSP_EVENT_TIMER]fxogs_offhook_disc<br>
> *Jul 24 14:16:18.076 AEST: htsp_timer_stop<br>
> *Jul 24 14:16:18.076 AEST: [0/0/0] set signal state = 0x4 timestamp = 0<br>
> *Jul 24 14:16:18.076 AEST: dsp_set_sig_state: [0/0/0] packet_len=12<br>
> channel_id=128 packet_id=39 state=0x4 timestamp=0x0<br>
> *Jul 24 14:16:18.076 AEST: htsp_timer - 2000 msechtsp_release_req: cause
16,<br>
> no_onhook 0<br>
> *Jul 24 14:16:18.080 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,<br>
> E_HTSP_RELEASE_REQ]fxogs_onhook_release<br>
> *Jul 24 14:16:18.080 AEST: htsp_timer_stop2<br>
> *Jul 24 14:16:18.080 AEST: htsp_timer_stop3<br>
> *Jul 24 14:16:18.080 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 0,
65535,<br>
> 1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)<br>
> *Jul 24 14:16:18.080 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --<br>
><br>
> *Jul 24 14:16:18.112 AEST: HTSP endpoint_info=aaln/S0/SU0/1, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
><br>
> *Jul 24 14:16:18.116 AEST: htsp_timer_stop3 htsp_setup_req<br>
> *Jul 24 14:16:18.120 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,<br>
> E_HTSP_SETUP_REQ]fxogs_onhook_setup<br>
> *Jul 24 14:16:18.120 AEST: [0/0/1] set signal state = 0x0 timestamp = 0<br>
> *Jul 24 14:16:18.120 AEST: dsp_set_sig_state: [0/0/1] packet_len=12<br>
> channel_id=129 packet_id=39 state=0x0 timestamp=0x0<br>
> *Jul 24 14:16:18.120 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 1,
65535,<br>
> 1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)<br>
> *Jul 24 14:16:18.120 AEST: htsp_timer - 10000 msechtsp_allocate_if --<br>
><br>
> *Jul 24 14:16:18.124 AEST: HTSP endpoint_info=aaln/S0/SU0/0, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
> htsp_allocate_if --<br>
><br>
> *Jul 24 14:16:18.144 AEST: HTSP endpoint_info=aaln/S0/SU0/0, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
><br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:18.344 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,<br>
> E_DSP_SIG_0110]<br>
> *Jul 24 14:16:18.348 AEST: fxogs_line_reversal_clid_wait. On_hook line<br>
> reversal detected possibily due to crossed cable<br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:20.076 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,<br>
> E_HTSP_EVENT_TIMER]<br>
> *Jul 24 14:16:20.076 AEST: [0/0/0, FXOGS_ONHOOK, E_HTSP_EVENT_TIMER]
-><br>
> ERROR: INVALID INPUT<br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:28.120 AEST: htsp_process_event: [0/0/1,<br>
> FXOGS_WAIT_TIP_GROUND, E_HTSP_EVENT_TIMER]fxogs_offhook_disc<br>
> *Jul 24 14:16:28.120 AEST: htsp_timer_stop<br>
> *Jul 24 14:16:28.120 AEST: [0/0/1] set signal state = 0x4 timestamp = 0<br>
> *Jul 24 14:16:28.120 AEST: dsp_set_sig_state: [0/0/1] packet_len=12<br>
> channel_id=129 packet_id=39 state=0x4 timestamp=0x0<br>
> *Jul 24 14:16:28.120 AEST: htsp_timer - 2000 msechtsp_release_req: cause
16,<br>
> no_onhook 0<br>
> *Jul 24 14:16:28.124 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,<br>
> E_HTSP_RELEASE_REQ]fxogs_onhook_release<br>
> *Jul 24 14:16:28.124 AEST: htsp_timer_stop2<br>
> *Jul 24 14:16:28.124 AEST: htsp_timer_stop3<br>
> *Jul 24 14:16:28.124 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 1,
65535,<br>
> 1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)<br>
> *Jul 24 14:16:28.124 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --<br>
><br>
> *Jul 24 14:16:28.144 AEST: HTSP endpoint_info=aaln/S0/SU0/2, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
><br>
> *Jul 24 14:16:28.148 AEST: htsp_timer_stop3 htsp_setup_req<br>
> *Jul 24 14:16:28.152 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,<br>
> E_HTSP_SETUP_REQ]fxogs_onhook_setup<br>
> *Jul 24 14:16:28.152 AEST: [0/0/2] set signal state = 0x0 timestamp = 0<br>
> *Jul 24 14:16:28.152 AEST: dsp_set_sig_state: [0/0/2] packet_len=12<br>
> channel_id=130 packet_id=39 state=0x0 timestamp=0x0<br>
> *Jul 24 14:16:28.152 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 2,
65535,<br>
> 1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)<br>
> *Jul 24 14:16:28.152 AEST: htsp_timer - 10000 msechtsp_allocate_if --<br>
><br>
> *Jul 24 14:16:28.156 AEST: HTSP endpoint_info=aaln/S0/SU0/1, type=2,<br>
> under_specifie<br>
> sjp-2801-01#u alld=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
> htsp_allocate_if --<br>
><br>
> *Jul 24 14:16:28.172 AEST: HTSP endpoint_info=aaln/S0/SU0/1, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
><br>
> *Jul 24 14:16:28.388 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,<br>
> E_DSP_SIG_0110]<br>
> *Jul 24 14:16:28.388 AEST: fxogs_line_reversal_clid_wait. On_hook line<br>
> reversal detected possibily due to crossed cable<br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:30.120 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,<br>
> E_HTSP_EVENT_TIMER]<br>
> *Jul 24 14:16:30.120 AEST: [0/0/1, FXOGS_ONHOOK, E_HTSP_EVENT_TIMER]
-><br>
> ERROR: INVALID INPUT<br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:38.152 AEST: htsp_process_event: [0/0/2,<br>
> FXOGS_WAIT_TIP_GROUND, E_HTSP_EVENT_TIMER]fxogs_offhook_disc<br>
> *Jul 24 14:16:38.152 AEST: htsp_timer_stop<br>
> *Jul 24 14:16:38.152 AEST: [0/0/2] set signal state = 0x4 timestamp = 0<br>
> *Jul 24 14:16:38.152 AEST: dsp_set_sig_state: [0/0/2] packet_len=12<br>
> channel_id=130 packet_id=39 state=0x4 timestamp=0x0<br>
> *Jul 24 14:16:38.152 AEST: htsp_timer - 2000 msechtsp_release_req: cause
16,<br>
> no_onhook 0<br>
> *Jul 24 14:16:38.156 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,<br>
> E_HTSP_RELEASE_REQ]fxogs_onhook_release<br>
> *Jul 24 14:16:38.156 AEST: htsp_timer_stop2<br>
> *Jul 24 14:16:38.156 AEST: htsp_timer_stop3<br>
> *Jul 24 14:16:38.156 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 2, 65535,<br>
> 1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)<br>
> *Jul 24 14:16:38.160 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --<br>
><br>
> *Jul 24 14:16:38.176 AEST: HTSP endpoint_info=aaln/S0/SU0/3, type=2,<br>
> under_specified=0,<br>
> service_type=2htsp_allocate_if:
MATCH!<br>
><br>
> *Jul 24 14:16:38.176 AEST: htsp_timer_stop3 htsp_setup_req<br>
> *Jul 24 14:16:38.180 AEST: htsp_process_event: [0/0/3, FXOGS_PARK,<br>
> E_HTSP_SETUP_REQ]htsp_busy_setup_reqhtsp_release_req: cause 17, no_onhook
0<br>
> *Jul 24 14:16:38.184 AEST: htsp_process_event: [0/0/3, FXOGS_PARK,<br>
> E_HTSP_RELEASE_REQ]<br>
> *Jul 24 14:16:38.184 AEST: fxogs_park_release_req<br>
> *Jul 24 14:16:38.188 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --<br>
><br>
> *Jul 24 14:16:38.192 AEST: HTSP endpoint_info=aaln/S0/SU0/2, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
> htsp_allocate_if --<br>
><br>
> *Jul 24 14:16:38.212 AEST: HTSP endpoint_info=aaln/S0/SU0/2, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
> htsp_allocate_if --<br>
><br>
> *Jul 24 14:16:38.216 AEST: HTSP endpoint_info=aaln/S0/SU0/3, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
> htsp_allocate_if --<br>
><br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:38.236 AEST: HTSP endpoint_info=aaln/S0/SU0/3, type=2,<br>
> under_specified=0,<br>
>
service_type=2htsp_allocate_if: MATCH!<br>
><br>
> *Jul 24 14:16:38.420 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,<br>
> E_DSP_SIG_0110]<br>
> *Jul 24 14:16:38.420 AEST: fxogs_line_reversal_clid_wait. On_hook line<br>
> reversal detected possibily due to crossed cable<br>
> sjp-2801-01#u all<br>
> *Jul 24 14:16:40.152 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,<br>
> E_HTSP_EVENT_TIMER]<br>
> *Jul 24 14:16:40.152 AEST: [0/0/2, FXOGS_ONHOOK, E_HTSP_EVENT_TIMER]
-><br>
> ERROR: INVALID INPUT<br>
><br>
> I hope that you can help me make more scene of this.<br>
><br>
> Thanks<br>
><br>
> 2008/7/24 Joe Cisco <<a href="mailto:smetsysocsic@gmail.com" target="_blank">smetsysocsic@gmail.com</a>>:<br>
>><br>
>> If you telnet to the gateway, do a "terminal monitor" then
issue a<br>
>> "debug vpm all". Try to dial out. If your ROUTE PATTERN(S) /
ROUTE<br>
>> LIST(S) / ROUTE GROUP(S) are configured properly, you should see the<br>
>> call attempt to go out one of the FXO ports. If not, go back and trace<br>
>> thru the RPs/RLs/RGs and see if everything looks correct - especially<br>
>> make sure the route list is registered.<br>
>><br>
>> Also, because it is MGCP, assuming you are using a lead 8 or lead 9<br>
>> for an outside access code, be sure you strip it off (probably in the<br>
>> route pattern) before you send the call out the gateway - UNLESS for<br>
>> some reason the POTS line is a plexar line and it expects a lead 9.<br>
>><br>
>> -Joe C.<br>
>><br>
>> On Wed, Jul 23, 2008 at 10:27 PM, Mark J <<a href="mailto:markju@gmail.com" target="_blank">markju@gmail.com</a>> wrote:<br>
>> > Thanks for prompt reply...<br>
>> ><br>
>> > Using MGCP<br>
>> ><br>
>> > Thanks<br>
>> ><br>
>> > 2008/7/24 Joe Cisco <<a href="mailto:smetsysocsic@gmail.com" target="_blank">smetsysocsic@gmail.com</a>>:<br>
>> >><br>
>> >> Are you using MGCP or H323?<br>
>> >><br>
>> >> -Joe C.<br>
>> >><br>
>> >> On Wed, Jul 23, 2008 at 10:07 PM, Mark J <<a href="mailto:markju@gmail.com" target="_blank">markju@gmail.com</a>> wrote:<br>
>> >> > Hey guys,<br>
>> >> ><br>
>> >> > I'm having an issues getting the FXO ports (outbound
calls) working<br>
>> >> > successfully working on 2811 thru CCM.<br>
>> >> ><br>
>> >> > I have inbound calls working fine, just can't get
outbound calls<br>
>> >> > working,<br>
>> >> > output tone is like a busy signal.<br>
>> >> ><br>
>> >> > Does anyone have a config that is working so that I can
compare my<br>
>> >> > config?<br>
>> >> ><br>
>> >> > Thanks.<br>
>> >> ><br>
>> >> > _______________________________________________<br>
>> >> > cisco-voip mailing list<br>
>> >> > <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
>> >> > <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
>> >> ><br>
>> >> ><br>
>> ><br>
>> ><br>
><br>
></p>
</div>
</div>
</div>
<p> </p>
</div>
</div></div></div>
</div>
</blockquote></div></div></div><br></div>
</blockquote></div><br></div>