<DIV>or you could buy a Valcom VIP-800 VoIP to paging with a AT186</DIV>
<DIV>
<DIV id=proddesc> </DIV>
<DIV> </DIV>
<DIV>Valcom Network Audio Port - Unmanaged enables voice access over an IP-based LAN/WAN. Others will allow page zone extensions anywhere else on the network.
<H5>Features:</H5>
<UL>
<LI>No server required
<LI>Two digit dial plan
<LI>No dial/auto destination
<LI>Easy windows based setup
<LI>Background music input
<LI>Contact closure out during page
<LI>600 Ohm supervised page port
<LI>Can be activated with contact closure during voice input
<LI><B>Applications:</B>
<UL>
<LI>VoIP remote paging systems; self-amplified & 70 Volt
<LI>Expand Valcom Paging Via LAN/WAN to new areas or other buildings </LI></UL>
<LI><B>Output:</B>
<LI>
<UL>
<LI>Analog Output Interface-
<LI>32 Ohm impedance
<LI>Frequency response: 200 Hz - 3400 Hz
<LI>Relay closure </LI></UL></LI></UL></DIV></DIV>
<DIV><BR> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">----- Original Message -----<BR>From: "Liakos, James" <JLIAKOS@CSR.COM.AU><BR>To:
<DIV id=proddesc>Valcom Network Audio Port - Unmanaged enables voice access over an IP-based LAN/WAN. Others will allow page zone extensions anywhere else on the network.
<H5>Features:</H5>
<UL>
<LI>No server required
<LI>Two digit dial plan
<LI>No dial/auto destination
<LI>Easy windows based setup
<LI>Background music input
<LI>Contact closure out during page
<LI>600 Ohm supervised page port
<LI>Can be activated with contact closure during voice input
<LI><B>Applications:</B>
<UL>
<LI>VoIP remote paging systems; self-amplified & 70 Volt
<LI>Expand Valcom Paging Via LAN/WAN to new areas or other buildings </LI></UL>
<LI><B>Input:</B>
<UL>
<LI>Analog Device Line Interface-
<LI>600 Ohm input impedance
<LI>VOX and contact closure input </LI></UL>
<LI><B>Output:</B>
<UL>
<LI>Analog Output Interface-
<LI>32 Ohm impedance
<LI>Frequency response: 200 Hz - 3400 Hz
<LI>Relay closure </LI></UL></LI></UL></DIV><BR>Subject: [cisco-voip] Need a Intercom/Paging solution.<BR>Date: Thu, 31 Jul 2008 09:47:41 +1000<BR><BR>Good morning all. <BR><BR>I need to come up with a cost effective solution. <BR><BR>I am running CCM 4.2(3). <BR><BR>I was thinking of making a 2nd line for all my IP Phones at the <BR>site and auto answer but CCM does not support that. <BR>I am now thinking of purchasing half a dozen small ceiling mount <BR>speakers, a decent Amplifier and then get an IP Phone, identify <BR>which pins on the 'headset port' are for the speaker (back of the <BR>phone), wire up a RCA socket and hook that into my Amp. <BR>This will allow 'integration' of our Intercom/Paging System into IPTEL... <BR><BR>Anybody else got a better idea ? <BR><BR>Thanks and Regards, <BR><BR>James Liakos <BR>Senior Network Engineer <BR>CSR Business Information Systems <BR>Level 5, 9 Help St <BR>Chatswood NSW 2067 <BR>C +61 2 9964 1110 <BR> +61 2 9495 7912 <BR> +61 416 563 110 <BR>http://www.csr.com.au <BR>mailto:jliakos@csr.com.au <BR><BR><BR>_______________________________________________<BR>cisco-voip mailing list<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE><BR>
--
<div> Be Yourself @ mail.com!<br>
Choose From 200+ Email Addresses<br>
Get a <b>Free</b> Account at <a href="http://www.mail.com/Product.aspx" target="_blank">www.mail.com</a>!</div>