<HTML>
<HEAD>
<TITLE>Re: [cisco-voip] CUE Password Reset</TITLE>
</HEAD>
<BODY>
<FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>Thanks Erick. It looks like I am able to get in now. Is there a way to format the flash card on the AIM? I am getting the error:<BR>
<BR>
GJW-CME#service-module service-Engine 0/0 session<BR>
Trying 10.12.20.211, 2025 ... Open<BR>
<BR>
<BR>
User Access Verification<BR>
<BR>
Username: gwong<BR>
Password:<BR>
<BR>
Trying to shutdown Service Module Service-Engine0/0<BR>
<BR>
<BR>
Initializing memory. Please wait. ... 256 MB SDRAM detected<BR>
BIOS Version: Cisco SE-AIM 01.02<BR>
BIOS Build date: 08/14/03<BR>
System Now Booting ...[BOOT-ASM]<BR>
7<BR>
<BR>
Please enter '***' to change boot configuration:<BR>
<BR>
Not a cisco supported CF. Please use cisco supported CF and reinstall the softw<BR>
are.<BR>
System Halted.<BR>
<BR>
<BR>
On 8/2/08 11:03 PM, "Erick Bergquist" <<a href="erickbee@gmail.com">erickbee@gmail.com</a>> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>It probably is the username/password from the router, not the CUE.<BR>
The router is prompting for authentication on that line (vty)<BR>
connection.<BR>
<BR>
<BR>
On Sat, Aug 2, 2008 at 9:33 PM, Ryan West <<a href="rwest@zyedge.com">rwest@zyedge.com</a>> wrote:<BR>
> I usually configure an alias to go to the cue from the CLI, from there you<BR>
> can create a new user and assign them to the admin group.<BR>
><BR>
><BR>
><BR>
> <a href="http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml#c1">http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml#c1</a><BR>
><BR>
><BR>
><BR>
> From: <a href="cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a><BR>
> [<a href="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</a>] On Behalf Of Gregory Wong<BR>
> Sent: Saturday, August 02, 2008 5:51 PM<BR>
> To: <a href="cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><BR>
> Subject: [cisco-voip] CUE Password Reset<BR>
><BR>
><BR>
><BR>
> Does anyone know how to reset the password on an AIM-CUE? When I try to gain<BR>
> access through a session it prompts me for a Username/Password and I'm not<BR>
> sure what it is. I tried to run service-engine service-module 0/0<BR>
> password-reset but it says that failed.<BR>
><BR>
> Thanks.<BR>
><BR>
> _______________________________________________<BR>
> cisco-voip mailing list<BR>
> <a href="cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><BR>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><BR>
><BR>
><BR>
<BR>
</SPAN></FONT></BLOCKQUOTE>
</BODY>
</HTML>