<div>So thats a call from CCM to NEC...</div>
<div>Doesnt look like you are sending any Calling name information at all.</div>
<div>So I'd start looking at CCM until you can get a debug ISDN q931 which shows you are sending the name..</div>
<div>Then you can look into the NEC.</div>
<div> </div>
<div>Where do you have the calling names filled in on the phone config?</div>
<div>Do you have both Display and Alerting name set on the line? (normal and ASCII?)</div>
<div> </div>
<div>Calling party settings on the gateway itself?</div>
<div>Route patterns to the NEC set to offnet or on net?</div>
<div> </div>
<div>You dont have any route patterns / translation patterns in there doing any restriction on the calling name?</div>
<div> </div>
<div>GW is definitely MGCP and set to Q.SIG?</div>
<div> </div>
<div>Cheers,</div>
<div> </div>
<div>Tim<br><br> </div>
<div><span class="gmail_quote">On 8/6/08, <b class="gmail_sendername">William Roy</b> <<a href="mailto:William.Roy@l7.com.au">William.Roy@l7.com.au</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>
<div dir="ltr"><font face="Tahoma" color="#000000" size="2">No we do not get connected name once the call is connected only calling number. This is a debug from an IP phone to a NEC phone</font></div>
<div dir="ltr"><font face="tahoma" size="2"></font> </div>
<div dir="ltr"><font face="tahoma" size="2"></font> </div>
<div dir="ltr">ho-vgate-1#<br>ho-vgate-1#<br>*Aug 6 08:21:39.106: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x001E<br> Sending Complete<br> Bearer Capability i = 0x8090A3<br> Standard = CCITT<br>
Transfer Capability = Speech<br> Transfer Mode = Circuit<br> Transfer Rate = 64 kbit/s<br> Channel ID i = 0xA9839F<br> Exclusive, Channel 31<br> Calling Party Number i = 0x0081, '6005'<br>
Plan:Unknown, Type:Unknown<br> Called Party Number i = 0x80, '4723'<br> Plan:Unknown, Type:Unknown<br>*Aug 6 08:21:39.166: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x801E<br>
Channel ID i = 0xA9839F<br> Exclusive, Channel 31<br>*Aug 6 08:21:39.170: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8 callref = 0x801E<br>*Aug 6 08:21:43.158: ISDN Se0/0/0:15 Q931: RX <- CONNECT pd = 8 callref = 0x801E<br>
Progress Ind i = 0x8082 - Destination address is non-ISDN<br> Connected Number i = 0x0081, '4723'<br>*Aug 6 08:21:43.162: ISDN Se0/0/0:15 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x001E<br> </div>
<div style="DIRECTION: ltr">
<hr>
<font face="Tahoma" size="2"><b>From:</b> <a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:smithsonianwa@gmail.com" target="_blank">smithsonianwa@gmail.com</a> [<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:smithsonianwa@gmail.com" target="_blank">smithsonianwa@gmail.com</a>] On Behalf Of Tim Smith [<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:thsglobal@gmail.com" target="_blank">thsglobal@gmail.com</a>]<br>
<b>Sent:</b> Wednesday, 6 August 2008 3:54 PM<br><b>To:</b> William Roy<br><b>Cc:</b> <a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> Re: [cisco-voip] Alerting Name being passed to PBX<br></font><br> </div>
<div><span class="e" id="q_11b971cb8cb6de36_1">
<div></div>
<div>
<div>Hi Wil,</div>
<div> </div>
<div>What do you see with a debug isdn q931?</div>
<div> </div>
<div>Do you get connected name once the call is established?</div>
<div> </div>
<div>Cheers,</div>
<div> </div>
<div>Tim.</div>
<div> </div>
<div> </div>
<div><br><br> </div>
<div><span class="gmail_quote">On 8/6/08, <b class="gmail_sendername">William Roy</b> <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:William.Roy@l7.com.au" target="_blank">William.Roy@l7.com.au</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>
<div dir="ltr"><font face="Tahoma" color="#000000" size="2">I have NEC IPX2400 PBX connected to a ISR2851 via an QSIG E1 link. The ISR is setup as an MGCP gateway with a CUCM 6.1 cluster. I am not seeing Calling name being passed either from an NEC phone to a Cisco IP phone or visa versa. Is there any debug I can run on the ISR to see if the cisco ip phone is sending Calling name?</font></div>
<div dir="ltr"><font face="tahoma" size="2"></font> </div>
<div dir="ltr"><font face="tahoma" size="2">regards</font></div>
<div dir="ltr"><font face="tahoma" size="2">Wil</font></div></div><br>_______________________________________________<br>cisco-voip mailing list<br><a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a onclick="return top.js.OpenExtLink(window,event,this)" href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br></blockquote></div><br> </div>
</span></div></div></blockquote></div><br>