<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1597" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV> </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mohamed.naina@sifycorp.com href="mailto:mohamed.naina@sifycorp.com">N
Mohamed</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco voip</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, August 07, 2008 11:58
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Newbie question- pls save
me</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Hi,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am testing a simple VOIP before an actual
deployment.</FONT></DIV>
<DIV><FONT face=Arial
size=2>
(10.1.1.0/32)</FONT></DIV>
<DIV><FONT face=Arial
size=2>Phone1---PBX1----Router1-----------Router2----PBX2---Phone2</FONT></DIV>
<DIV><FONT face=Arial
size=2>(1140)
(1120)</FONT></DIV>
<DIV><FONT face=Arial size=2>Installed a Voice IOS in the 2811 router with FXO
ports.</FONT></DIV>
<DIV><FONT face=Arial size=2>The PBX is connecting to the FXO port using RJ11
cable.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I configured this:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><STRONG>Router1:</STRONG></FONT></DIV>
<DIV><FONT face=Arial size=2>dial-peer voice 1 pots</FONT></DIV>
<DIV><FONT face=Arial size=2>destination pattern 1140</FONT></DIV>
<DIV><FONT face=Arial size=2>port 0/0/0</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>dial-peer voice 12 voip</FONT></DIV>
<DIV><FONT face=Arial size=2>destination pattern 1120</FONT></DIV>
<DIV><FONT face=Arial size=2>session target ipv4:10.1.1.2</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><STRONG>Router2:</STRONG></FONT></DIV>
<DIV><FONT face=Arial size=2>dial-peer voice 2 pots</FONT></DIV>
<DIV><FONT face=Arial size=2>destination pattern 1120</FONT></DIV>
<DIV><FONT face=Arial size=2>port 0/0/0</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>dial-peer voice 22 voip</FONT></DIV>
<DIV><FONT face=Arial size=2>destination pattern 1140</FONT></DIV>
<DIV><FONT face=Arial size=2>session target ipv4:10.1.1.1</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Now in the Router1 i tried a test call by this
command: csim start 1140, but i got a disconnect message.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My doubt is </FONT><FONT face=Arial
size=2>Whether the Router1 and PBX would talk automatically or a special
config is reqd?</FONT></DIV>
<DIV><FONT face=Arial size=2>Also, if i lift the handset of Phone1, I hear a
dial tone. Then if I try to press number 9 for outward dialling,
then</FONT></DIV>
<DIV><FONT face=Arial size=2>I hear no sound. I expect the Router1
should send a dial tone. This is not happening.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Pls help.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Regards</FONT></DIV>
<DIV><FONT face=Arial size=2>Mohamed.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BLOCKQUOTE></BODY></HTML>