<div>Hi,</div>
<div> </div>
<div>Which country is this for? is it basic-net3 switch type?</div>
<div> </div>
<div>From the router point of view, maintaining layer 1 and 2 connectivity either with CME or CUCM should be the same.</div>
<div>Your using H323, so its not like your backhauling the signalling to CCM with MGCP</div>
<div> </div>
<div>I would check that you used exactly the same config on the interface BRI and voice-port</div>
<div>The only thing that should change is you will be adding a dial peer to talk to CallManager.</div>
<div> </div>
<div>Is there only 1 single device (your BRI interface on the router) plugged into the ISDN line?</div>
<div> </div>
<div>If you have a lot of activity - plugging in, changing configs etc, the ISDN switch can respond to this in funny ways. I.e. lock up the port on the telco side. You may need to sort out your final config, shut / no shut. Then give them a call, and get them to reset from their end.</div>
<div>Also might need to check their config - should probably be point to point and permanent. (different telcos call these different things)</div>
<div>1st setting is related to whether you have multiple devices on the ISDN line.</div>
<div>2nd setting is the one that decides whether layer 2 is always active, or if it only comes up on an inbound call.</div>
<div> </div>
<div>May be worth posting your 2 configs so we can take a look.</div>
<div> </div>
<div>Cheers,</div>
<div> </div>
<div>Tim.</div>
<div> </div>
<div> </div>
<div><br><br> </div>
<div><span class="gmail_quote">On 8/12/08, <b class="gmail_sendername">Lemon</b> <<a href="mailto:lemon@lemon.za.net">lemon@lemon.za.net</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">hi,<br><br><br>On Tue, Aug 12, 2008 at 2:26 PM, Dustin S. Fowler<br><<a href="mailto:dustin.s.fowler@gmail.com">dustin.s.fowler@gmail.com</a>> wrote:<br>
> Lemon,<br>><br>> This is most likely a physical problem. Possibly on the carriers end. It is<br>> also one of the questions on the TUC exam.<br>><br><br>thanks, we suspected that but telco claims it is fine. also this was<br>
working fine untill yesterday when we started to set it up as h323<br>gateway. and now customer is leaning towards telco saying it can't be<br>that. *sigh*<br><br>thnx<br>charl<br>_______________________________________________<br>
cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br>