<div dir="ltr">Hi guys,<br><br>tried it - and it works :)<br>only drawback so far is a delay of about 40 seconds using the TSP tool for dialing from MS Outlook.<br><br>Alfred.<br><br><div class="gmail_quote">On Thu, Jul 31, 2008 at 3:08 PM, Alfred Thyri <span dir="ltr"><<a href="mailto:alfred.thyri@gmail.com">alfred.thyri@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div dir="ltr">Hi Ryan,<br><br>Do you know if this procedure works on a UC520, too?<br><font color="#888888"><br>
Alfred.</font><div><div></div><div class="Wj3C7c"><br><br><div class="gmail_quote">On Tue, Jul 15, 2008 at 2:44 PM, Ryan West <span dir="ltr"><<a href="mailto:rwest@zyedge.com" target="_blank">rwest@zyedge.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Christopher,<br>
<br>
You can also run 12.4(15)XZ, which is a BU (Business Unit) release under the 12.4(15)T train. That being said, I would trust the releases under the T train more than the BU's. Most likely there are no substantial changes between 12.4(20)T and 12.4(15)XZ concerning the operation of CME. However, the regression testing performed on the T train is much longer and involved than that of the BU's. The BU's are allowed to brought to market much quicker features sake. However, after checking out the open caveats between releases, you might be better off going with 12.4(15)XZ1.<br>
<br>
To answer your original question though, 12.4(15)XZ is the oldest code you can run it on. There are a lot of useful features that were introduced in 7.0/4.3, octo lines, xfer to voicemail, and some hunt group changes.<br>
<br>
Here is the relevant information you'll need to get the 7937 working in CME 4.3/7.0:<br>
<br>
tftp-server flash:phone/7937/apps37sccp.1-1-1-1.bin alias apps37sccp.1-1-1-1.bin<br>
<br>
telephony-service<br>
load 7937 apps37sccp.1-1-1-1<br>
<br>
ephone-type 7937<br>
device-id 431<br>
device-name Cisco 7937 Conference<br>
num-buttons 1<br>
max-presentation 1<br>
<br>
<br>
ephone 20<br>
device-security-mode none<br>
mac-address xxxx.xxxx.xxxx<br>
type 7937<br>
button 1:23<br>
<br>
You'll also need to do a factory reset using **1.<br>
<font color="#888888"><br>
-ryan<br>
</font><div><div></div><div><br>
-----Original Message-----<br>
From: <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] On Behalf Of Christopher M. Bomba<br>
Sent: Tuesday, July 15, 2008 7:45 AM<br>
To: <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
Subject: [cisco-voip] 7937 on CME<br>
<br>
While looking over the compatibility matrix, I noticed that no code earlier than 7.0/4.3 supports the 7937. That seems pretty extreme as the document also says that you need to upgrade the IOS to 12.4(20)T to support this release. That code was only released on July 11th.<br>
<br>
Does anyone have a 7937 running in CME on an older code? I was looking more along the lines of CME 4.1 or even older.<br>
<br>
Thanks,<br>
<br>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<br>
Christopher Bomba CCNP, CCVP<br>
solutions4networks<br>
Email - <a href="mailto:chris@s4nets.com" target="_blank">chris@s4nets.com</a><br>
Cell - 412.398.3990<br>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</div></div></blockquote></div><br></div></div></div>
</blockquote></div><br></div>