<html>
<head>
<style>
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</style>
</head>
<body class='hmmessage'>
<style>.hmmessage P{margin:0px;padding:0px}body.hmmessage{FONT-SIZE: 10pt;FONT-FAMILY:Tahoma}</style>This is what I am trying to achieve (see attached figure).<br><br>We have 3-sites. Site-A and B are local and Site-C is remote site connected via site-to-site VPN. The client has some sort of wireless terminals and willing to use Cisco wireless solution. WLCs in INSIDE zone.<br><br>Option-2 seems to be more logical.<br><br>Need suggestions!<br><br>Regards,<br>Khalid<br><br>> Date: Tue, 19 Aug 2008 15:46:59 -0500<br>> From: smetsysocsic@gmail.com<br>> To: khalid_khursheed@hotmail.com<br>> Subject: Re: [cisco-voip] wlc 4402 and asa 5505<br>> CC: cisco-voip@puck.nether.net<br>> <br>> Depends heavily on many factors, mostly the design/goals needed accomplished.<br>> <br>> Option 1) Much like a cisco phone has the 'option 150' dhcp parameter,<br>> there is an 'option 43' dhcp parameter for an LWAPP (on most APs this<br>> isn't simply an IP address like it is on the phone, you have to pass a<br>> hex number that has the IP of the controller in it). In the option 43<br>> you specify what the IP is of the parent controller. Keep in mind that<br>> the ASA will have to allow traffic between the two.<br>> <br>> Option 2) (My preference) first, trunk the WLC to your switch, then<br>> create a LWAP management VLAN that is passed to the AP - put the WLC<br>> and the APs in this mgmt vlan - if they are local to the same vlan,<br>> they'll find each other. This lwap mgmt vlan is strictly for<br>> communications/mgmt, and doesn't have to be passed out as a wireless<br>> VLAN. Then, in the controller, build your INTERFACE for this outside<br>> VLAN and tie it to the SSID.<br>> <br>> Hope this helps.<br>> <br>> -Joe C.<br>> <br>> On Tue, Aug 19, 2008 at 5:59 AM, Syed Khalid Ali<br>> <khalid_khursheed@hotmail.com> wrote:<br>> > hi,<br>> ><br>> ><br>> > I know this is not the right place to ask, but no where else to go...<br>> ><br>> > If we have WLC 4402 setup in Inside or DMZ zone and LWAP in Outside zone,<br>> > will it be able to register with wireless lan controller?<br>> ><br>> > regards,<br>> ><br>> > Khalid<br>> ><br>> > ________________________________<br>> > Connect to the next generation of MSN Messenger Get it now!<br>> > _______________________________________________<br>> > cisco-voip mailing list<br>> > cisco-voip@puck.nether.net<br>> > https://puck.nether.net/mailman/listinfo/cisco-voip<br>> ><br>> ><br><br /><hr />Explore the seven wonders of the world <a href='http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE' target='_new'>Learn more!</a></body>
</html>