<div dir="ltr">The same VIC-2FXS card? Possibly a bad port.<br><br>Also, port 0 is on the right, port 1 is on the left as you look at it.<br><br><br><br>Jonathan<br><br><div class="gmail_quote">On Fri, Aug 22, 2008 at 9:15 PM, john edwards <span dir="ltr"><<a href="mailto:voicenerd@googlemail.com">voicenerd@googlemail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi,<br>
<br>
Got a newbie question for everyone - I have googled like crazy and<br>
spent hours trying to fix it, but I'm not making any headway. But, I<br>
have the feeling that I am missing something VERY simple.<br>
<br>
Thanks in advance for any help!<br>
<br>
<br>
<br>
I have a 2600 router and a VIC-2FXS card, but I can't get a dial-tone<br>
on the second port.<br>
<br>
My config is very simple:<br>
<br>
voice-port 1/0/0<br>
cptone GB<br>
!<br>
voice-port 1/0/1<br>
cptone GB<br>
!<br>
<br>
<br>
Also, I notice that when I pick up the phone attached to the first<br>
port (1/0/0), the green light next to the 1/0/1 port lights (1/0/0<br>
doesn't), and the 'show voice call summary' command shows that port<br>
1/0/1 rather than 1/0/0 is off hook!!!!<br>
<br>
Does anyone know what the answer to this might be? Any hints and tips?<br>
<br>
(By the way, I also tried this with a 2811 with a VIC2-2FXS card with<br>
the above config, and got the same result!).<br>
<br>
<br>
Thanks,<br>
<br>
Voicenerd.<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br></div>