<div dir="ltr">You can not do what your are doing. You will get slip errors if you try to run data on one port and voice on another port on the SAME card. You need two cards with one prort each. <br><br>
<div class="gmail_quote">On Fri, Aug 22, 2008 at 2:46 PM, Carter, Bill <span dir="ltr"><<a href="mailto:bcarter@sentinel.com">bcarter@sentinel.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div lang="EN-US" vlink="purple" link="blue">
<div>
<p>Any solution... VWIC2-2MFT-T1, port 0 Data T1, port 1 Voice PRI. Getting lots of slips and CRC errors 0/0/0 data t1 port.</p>
<p> </p>
<p>I have</p>
<p>network-clock-participate wic 0</p>
<p>network-clock-select 1 t1 0/1/0</p>
<p> </p>
<p>controller T1 0/0/0<br>framing esf<br>linecode b8zs</p>
<p>clock source line<br>channel-group 1 timeslots 1-24<br>!<br>controller T1 0/1/0<br>framing esf<br>linecode b8zs</p>
<p>clock source line<br>pri-group timeslots 1-24</p>
<p> </p></div></div><br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>