<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="MSHTML 6.00.2900.3395" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>how close is the ATA to the elevator? could it be a
line driver issue? viking sells some line drivers that might be
useful.</FONT></DIV>
<DIV> </DIV>
<DIV>Lelio<BR>--------------------------------------------------------------------------------<BR>Lelio
Fulgenzi, B.A.<BR>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1<BR>(519) 824-4120 x56354 (519) 767-1060 FAX
(JNHN)<BR>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
<BR>...seen on a Geek Squad patch cord: "While it is the same length, this 7'
crossover cable<BR>is not regulation issue for most competitive Manhattan double
dutch leagues.</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=adman@adman.net href="mailto:adman@adman.net">Adam Blomfield</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, August 28, 2008 3:19
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-voip] Elevator
Phone</DIV>
<DIV><BR></DIV>
<DIV dir=ltr>FYI I never could make it work on a VG224, but it worked fine on
an ATA186.<BR><BR>-Adam<BR><BR>
<DIV class=gmail_quote>On Wed, Aug 27, 2008 at 12:59 PM, Adam Blomfield <SPAN
dir=ltr><<A href="mailto:adman@adman.net">adman@adman.net</A>></SPAN>
wrote:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV dir=ltr>I actually believe that the VG224 defaults to high idle
voltage. I have not been able to come up with anything that will makes this
work off the VG224. I compared a debug of a call from the elevator phone
that was disconnected to a call from my buttset that went through just fine.
There are no differences between them. For some reason the elevator device
is not liking the line and disconnecting itself, but nothing I have changed
(idle voltage, output attenuation, input gain and a bunch of other
miscellaneous stuff) has made any difference. I'm going to bring an ATA
tomorrow to see if that makes any difference. <BR><BR>Thanks to everyone who
has made suggestions!<BR><BR>-Adam<BR><BR>
<DIV class=gmail_quote>
<DIV>
<DIV></DIV>
<DIV class=Wj3C7c>On Wed, Aug 27, 2008 at 11:55 AM, Biffle, Gerrad <SPAN
dir=ltr><<A href="mailto:Gerrad.Biffle@greensboro-nc.gov"
target=_blank>Gerrad.Biffle@greensboro-nc.gov</A>></SPAN>
wrote:<BR></DIV></DIV>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">
<DIV>
<DIV></DIV>
<DIV class=Wj3C7c>
<DIV lang=EN-US vlink="purple" link="blue">
<DIV>
<P><SPAN style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">The "idle-voltage
high" is a great suggestion. We've had a lot of luck with 12.4(15)T3
on our VG224s – no troubles to speak of.</SPAN></P>
<P><SPAN style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<DIV>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: rgb(181,196,223) 1pt solid; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 3pt; BORDER-BOTTOM: medium none">
<P style="MARGIN-LEFT: 0.5in"><B><SPAN
style="FONT-SIZE: 10pt">From:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> <A
href="mailto:cisco-voip-bounces@puck.nether.net"
target=_blank>cisco-voip-bounces@puck.nether.net</A> [mailto:<A
href="mailto:cisco-voip-bounces@puck.nether.net"
target=_blank>cisco-voip-bounces@puck.nether.net</A>] <B>On Behalf Of
</B>Carroll, Barry<BR><B>Sent:</B> Wednesday, August 27, 2008 12:13
PM<BR><B>To:</B> Adam; Ocampo, Walter
<DIV>
<DIV></DIV>
<DIV><BR><B>Cc:</B> cisco-voip<BR><B>Subject:</B> Re: [cisco-voip]
Elevator Phone</DIV></DIV></SPAN>
<P></P></DIV></DIV>
<DIV>
<DIV></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"> </P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">Adam,</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">On the voice-port, try
adding the 'idle-voltage high' command. I've experienced the same
symptoms with elevator phones and intercoms and that command resolved the
issue.</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">Thanks,</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">-Barry</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: rgb(181,196,223) 1pt solid; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 3pt; BORDER-BOTTOM: medium none">
<P style="MARGIN-LEFT: 0.5in"><B><SPAN
style="FONT-SIZE: 10pt">From:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> <A
href="mailto:cisco-voip-bounces@puck.nether.net"
target=_blank>cisco-voip-bounces@puck.nether.net</A> [mailto:<A
href="mailto:cisco-voip-bounces@puck.nether.net"
target=_blank>cisco-voip-bounces@puck.nether.net</A>] <B>On Behalf Of
</B>Adam<BR><B>Sent:</B> Wednesday, August 27, 2008 7:15 AM<BR><B>To:</B>
Ocampo, Walter<BR><B>Cc:</B> cisco-voip<BR><B>Subject:</B> Re:
[cisco-voip] Elevator Phone</SPAN></P></DIV>
<P style="MARGIN-LEFT: 0.5in"> </P>
<DIV>
<P
style="MARGIN-BOTTOM: 12pt; MARGIN-LEFT: 0.5in; MARGIN-RIGHT: 0in">Walter,<BR><BR>The
VG224 is running 12.4(9)T7. The calls are staying on campus, so I can't
debug it at the PSTN gateway. If I use an analog handset at the location
it works just fine - it appears to be an issue with the elevator phone
unit itself. I don't know if the phone is not detecting the ringing or
something like that. I'm going to head back over to it in a few minutes to
try some more hands on troubleshooting.<BR><BR>Thanks,<BR>Adam</P>
<DIV>
<P style="MARGIN-LEFT: 0.5in">On Wed, Aug 27, 2008 at 9:00 AM, Ocampo,
Walter <<A href="mailto:WOCAMPO@broward.org"
target=_blank>WOCAMPO@broward.org</A>> wrote:</P>
<DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">Hi Adam,</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">How is the Port? It is
up?,</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">Do you the see the port
unhook when they are dialing?I</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">Also, try to make a call
out to the PSTN and do a debug in the gateway to see if you are getting
the numbers?</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)">What version are you
running in the VG224?</SPAN></P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<P style="MARGIN-LEFT: 0.5in"><SPAN
style="FONT-SIZE: 11pt; COLOR: rgb(31,73,125)"></SPAN> </P>
<DIV
style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: 1pt solid; PADDING-LEFT: 0in; PADDING-BOTTOM: 0in; BORDER-LEFT: medium none; PADDING-TOP: 3pt; BORDER-BOTTOM: medium none">
<P style="MARGIN-LEFT: 0.5in"><B><SPAN
style="FONT-SIZE: 10pt">From:</SPAN></B><SPAN style="FONT-SIZE: 10pt"> <A
href="mailto:cisco-voip-bounces@puck.nether.net"
target=_blank>cisco-voip-bounces@puck.nether.net</A> [mailto:<A
href="mailto:cisco-voip-bounces@puck.nether.net"
target=_blank>cisco-voip-bounces@puck.nether.net</A>] <B>On Behalf Of
</B>Adam<BR><B>Sent:</B> Wednesday, August 27, 2008 9:14 AM<BR><B>To:</B>
cisco-voip<BR><B>Subject:</B> [cisco-voip] Elevator Phone</SPAN></P></DIV>
<DIV>
<P style="MARGIN-LEFT: 0.5in"> </P>
<DIV>
<P style="MARGIN-LEFT: 0.5in">I have a couple of elevator phones connected
to a VG224 gateway that do not want to work. When you hit the call button
they pick up the line and dial digits, but after a couple of seconds they
disconnect. Other elevator units on campus work, but there is a
combination of elevators manufacturers and phone models. I unfortunately
do not have the make and model of the phones that don't work in front on
me. Any suggestions? The VG224 gateways are MGCP
controlled.<BR><BR>Thanks,<BR>Adam</P></DIV></DIV></DIV></DIV></DIV>
<P style="MARGIN-LEFT: 0.5in"> </P></DIV>
<DIV>
<DIV style="MARGIN-LEFT: 0.5in; TEXT-ALIGN: center" align=center>
<HR align=center width="100%" SIZE=2>
</DIV>
<P style="MARGIN-LEFT: 0.5in">This message and any attachments are
intended only for the use of the addressee and may contain information
that is privileged and confidential. If the reader of the message is not
the intended recipient or an authorized representative of the intended
recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this
communication in error, please notify us immediately by e-mail and delete
the message and any attachments from your system.
</P></DIV></DIV></DIV></DIV><BR><BR>
<TABLE style="COLOR: black" bgColor=white>
<TBODY>
<TR>
<TD><BR>=======================================================<BR>Please note that email sent to and from this address is subject <BR>to the North Carolina Public Records Law and may be disclosed to <BR>third parties.</TD></TR></TBODY></TABLE></DIV><BR></DIV></DIV>_______________________________________________<BR>cisco-voip
mailing list<BR><A href="mailto:cisco-voip@puck.nether.net"
target=_blank>cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target=_blank>https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR><BR></BLOCKQUOTE></DIV><BR></DIV></BLOCKQUOTE></DIV><BR></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>cisco-voip mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BODY></HTML>