<div dir="ltr">This part of it is entirely labbed up on my desk so there isn't much sensitive. For brevity I've included what I believe is all of the relevant config. Just experimenting so there are not dial peers or fxo connections yet.<br>
<br>I assumed the phones would be told to download whatever is defined in the load command by model, but it appears that they're remembering their original call manager configuration and ignoring the CME load command but pulling the right option 150 address, etc via DHCP. I dug around in the 7911 status messages and saw each of:<br>
<br>"DNS Timeout CiscoCM1", "TFTP NOT AUTHORIZED: <a href="http://192.168.1.129">192.168.1.129</a>", "CTL update failed", two attempts to resolve a hostname based call manager from the old configuration, "No DNS Server IP", and a "File Not Found" with no detail on the filename being sought.<br>
<br>...but none of the tftp or sccp debugging on the router is revealing any attempts to communicate with the router for any files or images.<br><br>Here is the CME router:<br><br>boot system flash:c2800nm-advipservicesk9-mz.124-20.T.bin<br>
!<br>!<br>ip cef<br>no ip dhcp use vrf connected<br>ip dhcp excluded-address <a href="http://192.168.1.129">192.168.1.129</a><br>!<br>ip dhcp pool VOICE<br> network <a href="http://192.168.1.128">192.168.1.128</a> <a href="http://255.255.255.192">255.255.255.192</a><br>
option 150 ip <a href="http://192.168.1.129">192.168.1.129</a> <br> default-router <a href="http://192.168.1.129">192.168.1.129</a> <br> domain-name <a href="http://foo.com">foo.com</a><br>!<br>tftp-server flash:P00307020200.bin<br>
tftp-server flash:P00307020200.loads<br>tftp-server flash:P00307020200.sb2<br>tftp-server flash:P00307020200.sbn<br>tftp-server flash:P00403020214.bin<br>tftp-server apps11.8-3-2-27.sbn<br>tftp-server cnu11.8-3-2-27.sbn<br>
tftp-server cvm11sccp.8-3-2-27.sbn<br>tftp-server dsp11.8-3-2-27.sbn<br>tftp-server jar11sccp.8-3-2-27.sbn<br>tftp-server SCCP11.8-3-3S.loads<br>tftp-server term06.default.loads<br>tftp-server term11.default.loads<br>!<br>
telephony-service<br> load 7911 SCCP11.8-3-3S<br> load 7960-7940 P00307020200<br> max-ephones 30<br> max-dn 30<br> ip source-address <a href="http://192.168.0.1">192.168.0.1</a> port 2000<br> max-conferences 8 gain -6<br>
transfer-system full-consult<br> create cnf-files version-stamp Jan 01 2002 00:00:00<br>!<br>!<br>ephone-dn 1 dual-line<br> number 1000 secondary 2025551111<br>!<br>!<br>ephone-dn 2 dual-line<br> number 1112 secondary 2025551112<br>
!<br>!<br>ephone 1<br> device-security-mode none<br> mac-address 001B.0C18.3E0C<br> button 1:2 2:1<br>!<br>ephone 2<br> device-security-mode none<br> mac-address 0012.DAAD.3143<br> button 1:2 2:1<br>!<br>ephone 3<br>
device-security-mode none<br> mac-address 001B.D4A0.5D5E<br> button 1:2 2:1<br>!<br><br><br><div class="gmail_quote">On Wed, Sep 3, 2008 at 1:29 PM, Paul <span dir="ltr"><<a href="mailto:asobihoudai@yahoo.com">asobihoudai@yahoo.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;"><div>Let's see your configuration....[preferrably without any sensitive information in it...]<br>
<font color="#888888"><br>Paul<br></font></div><div><div></div><div class="Wj3C7c"><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;"><br><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;">
----- Original Message ----<br>From: Jeff Garvas <<a href="mailto:jeff@cia.net" target="_blank">jeff@cia.net</a>><br>To: <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
Sent: Wednesday, September 3, 2008 9:47:14 AM<br>Subject: [cisco-voip] Moving phones from CM 4.1.3 to a CME / 12.4(20)T<br><br><div dir="ltr"><br>I'm experimenting with CME in a 12.4(20)T install (2811, 3560) and trying to move phones from a CUCM 4.1.3 environment to CME. <br>
<br>If I take a 7911 phone that is working in the CUCM environment and move it to the labbed up CME install it boots, states that its
configuring IP, configuring the CM list, and then goes back to configuring IP. It remains looping indefinately, but if I do a factory reset the phone will upgrade and register to CME.<br>
<br>CME is configured to 'load 7911 SCCP11.8-3-3S' and there is a matching ephone configured as well, but it appears as if nothing is every queried via tftp.<br><br>If I query the settings in the phone itself while its looping it still knows about the CUCM settings despite its new found DHCP / TFTP values.<br>
<br> Is there a way to get the phone to upgrade/downgrade its image without doing a physical factory reset? I'd like to be able to modify phones "in place" without needing to physically touch them.<br><br>
If I take the 'upgraded' phone back to the CUCM cluster it immediately upgrades without being factory reset. Am I missing something in the CME configuration that could permit this?<br>
<br><br></div>
</div></div></div></div></div><br>
</div></blockquote></div><br></div>