<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.3157" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=783251314-03092008><FONT face=Arial
color=#0000ff size=2>To support video through an IOS device requires some unique
dial peers. Have a look at this document:</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=783251314-03092008><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=783251314-03092008><FONT face=Arial
color=#0000ff size=2><A
href="http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/h320gw.html">http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/h320gw.html</A></FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Justin
Steinberg<BR><B>Sent:</B> Tuesday, September 02, 2008 8:44 PM<BR><B>To:</B>
cisco-voip<BR><B>Subject:</B> [cisco-voip] Polycom Video integrated to
Cisco<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV dir=ltr>I have a couple of Polycom video units that are currently
integrated via PRI to an Avaya PBX for ISDN access to the
PSTN.<BR><BR>C.O.---PRI-----Avaya-------PRI------Polycom (VSX8000)<BR><BR>I am
forklifting the Avaya for CUCM. Has anyone used the TDM switching functionality
in the ISR to switch inbound/outbound PSTN ISDN video calls between pots
dial-peers to provide the same functionality on Cisco that is currently provided
by the Avaya PBX? Any better solution than TDM switching that works
well?<BR><BR>I could always fall back on using an Adtran. Where the C.O
PRIs terminate to Adtran and the Adtran routes the video DID to the polycom
units and everything else to the CUCM/ISRs. But I'd rather not use the
Adtran if I can avoid it.<BR><BR>Thanks<BR><BR>Justin<BR></DIV></BODY></HTML>