<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3395" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Check your ACLs. If you can multicast from one area
to another, theoretically you should be able to multicast the other
way.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>If you have ACLs, put a "log" on all your denies
and then do a show log or tail your syslog file on your syslog
server.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>Lelio<BR>--------------------------------------------------------------------------------<BR>Lelio
Fulgenzi, B.A.<BR>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1<BR>(519) 824-4120 x56354 (519) 767-1060 FAX
(JNHN)<BR>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
<BR>...seen on a Geek Squad patch cord: "While it is the same length, this 7'
crossover cable<BR>is not regulation issue for most competitive Manhattan double
dutch leagues.</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=svoll.voip@gmail.com href="mailto:svoll.voip@gmail.com">Scott
Voll</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, September 05, 2008 11:55
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] Multicast
issue</DIV>
<DIV><BR></DIV>
<DIV dir=ltr>
<DIV>I don't even pretend to think I really know multicast, so if this is a
simple question am sorry ahead of time.</DIV>
<DIV> </DIV>
<DIV>is multicast routing directional? Can you setup multicast to only
route in one direction?</DIV>
<DIV> </DIV>
<DIV>I have ip mulitcast-routing on each device and ip pim sparse-dense-mode
on each interface.</DIV>
<DIV> </DIV>
<DIV>Multicast is going from main site to remote just fine, but I have a
device at the remote site that needs to multicast back to the central site and
I need to know how I go about routing back?</DIV>
<DIV> </DIV>
<DIV>I do have a RP at the Central site manually configured.</DIV>
<DIV> </DIV>
<DIV>Thanks</DIV>
<DIV> </DIV>
<DIV>Scott</DIV>
<DIV> </DIV>
<DIV> </DIV></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>cisco-voip mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BODY></HTML>