<div>Hi</div>
<div> </div>
<div>I have VIC2-4FXO card in the 3825 router. I have the same very old FXO disconnect issue. I have also done the configuration for the disconnect supervision but no luck. my question is - is there any specific region configuration for the disconnect supervision.? i am located at dubai.....</div>
<div>below is the configuration commands</div>
<div> </div>
<div>voice class dualtone-detect-params 1<br> freq-max-deviation 25<br> freq-max-power 0<br> freq-min-power 13<br> freq-power-twist 4<br> cadence-variation 4<br>!<br>!<br>voice class custom-cptone UAE-CUSTOM-SIEMENS<br> dualtone disconnect<br>
frequency 425<br> cadence 425 325 250 500<br>!<br>!<br>voice class custom-cptone UAE-CUSTOM-ERICSSON<br> dualtone disconnect<br> frequency 425<br> cadence 325 325<br>!<br>!<br>voice class custom-cptone UAE-CUSTOM-FETEX<br>
dualtone disconnect<br> frequency 425<br> cadence 375 375<br>!<br>!<br>voice class custom-cptone UAE-CUSTOM-ALCATEL<br> dualtone disconnect<br> frequency 425<br> cadence 375 375<br>!<br>!</div>
<div>voice-port 0/0/0<br> supervisory disconnect dualtone mid-call<br> supervisory custom-cptone UAE-CUSTOM-ALCATEL<br> supervisory dualtone-detect-params 1<br> timeouts call-disconnect 5<br> timeouts wait-release 5<br> connection plar 801<br>
caller-id enable<br>!<br>voice-port 0/0/1<br> supervisory disconnect dualtone mid-call<br> supervisory custom-cptone UAE-CUSTOM-ALCATEL<br> supervisory dualtone-detect-params 1<br> timeouts call-disconnect 5<br> timeouts wait-release 5<br>
connection plar 801<br> caller-id enable<br>!<br>voice-port 0/0/2<br> supervisory disconnect dualtone mid-call<br> supervisory custom-cptone UAE-CUSTOM-ALCATEL<br> supervisory dualtone-detect-params 1<br> timeouts call-disconnect 5<br>
timeouts wait-release 5<br> connection plar 801<br> caller-id enable<br>!<br>voice-port 0/0/3<br> supervisory disconnect dualtone mid-call<br> supervisory custom-cptone UAE-CUSTOM-ALCATEL<br> supervisory dualtone-detect-params 1<br>
timeouts call-disconnect 5<br> timeouts wait-release 5<br> connection plar 801<br> caller-id enable</div>
<div> </div>
<div> </div>
<div> </div>
<div>Also I do not see any caller id coming in inspite i have the caller-d enable command......</div>
<div> </div>
<div>i suspect some configuration for the fxo ports specific to the region or country</div>
<div> </div>
<div>help will be much appreciated<br clear="all"><br>-- <br>Best Regards<br><br>Mohammed Abdul Razzaq<br><br><br>'A bird sitting on the branch of a tree is not afraid of the branch breaking; bcoz the bird trusts not the branch but its own wings. BELIEVE IN URSELF' </div>