<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>there is a forward on unregistered in later versions of ccm. i think v6 was the first.<br><br>as a workaround, you could forward all phones that are not registered using the appropriate CSS and route pattern. <br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Kelemen Zoltan" <keli@carocomp.ro><br>To: "cisco-voip mailinglist" <cisco-voip@puck.nether.net><br>Sent: Thursday, October 30, 2008 11:18:44 AM GMT -05:00 US/Canada Eastern<br>Subject: [cisco-voip] how to allow alternate routes for unregistered phones<br><br>Hi!<br><br>I'm trying to migrate some phones from a PBX to a CCM system. The CCM <br>currently has a route pattern towards the PBX and the migrated phones <br>will have extensions from the same range.<br><br>Since there are a lot of phones and some administrative hurdles as well, <br>I can't just move all the phones at once. What I wanted to do, was to <br>register the IP phones in the CallManager, keep the route pattern, and <br>deploy the phones as I can.<br><br>I just supposed, that a phone, as long as it's not registered with the <br>CallManager won't "take over" the call to it's line number and allow the <br>call to go out on the route pattern. Only it isn't working like that. Is <br>there any setting I can change to make it work like I expect it to?<br><br>Ex:<br><br>Route pattern to 4XX goes out to gateway.<br>451 is registered to CCM, 452 is configured but in "not registered" <br>state, 453 isn't added to CCM at all.<br><br>What I expect to happen:<br>Calling 451 rings out on IP phone, while calling 452 and 453 would go <br>out to the PBX and ring there, if applicable.<br><br>What happens instead:<br>451 rings, 452 gives busy, 453 goes to PBX.<br><br>Dialed Number Analyzer shows an alternate match for 452, but that's it.<br><br>(I'm currently testing this on CCM4.2, with a IP Communicator, but I <br>don't really think that's relevant)<br><br>thanks,<br> Zoltan<br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>