Anthony,<br><br>The transcoder has a Device Pool configuration section so that you can put the Transcoder in a specific region.<br><br>In this case since the Transcoder is physically located at the central site you'll want to make sure it is in the central site Device Pool.<br>
<br>The transcoder is invoked by the device using the higher bandwidth codec, in this case the central site phones, so you'll want to make sure the MRGL of the central site phones contains the transcoder.<br><br><div class="gmail_quote">
2008/11/19 Anthony Kouloglou <span dir="ltr"><<a href="mailto:akoulgr@gmail.com">akoulgr@gmail.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi Peter,<br>
no, devices in central site do not support ilbc (7941G-GE). That is why i want to ude transcoder. <br>
My transcoder is located at the central site.<br>
The 2 remote devices are registered in the central ccm cluster (7942G).<br>
All devices use g711 in their own device pool and ilbc with the other.<br>
That is what i want to know: where must the transcoder be configured? in which device pool?<br>
<br>
O/H Peter Slow έγραψε:
<div><div></div><div class="Wj3C7c"><blockquote type="cite">
<pre>Anthony, we need some more infromation to tell you waht's happening.<br><br>can both devices do iLBC? Trying to undesrtand what call flow is<br>requiing a transcoder.<br>Where is your transcoder physically located?<br>
<br>what types of devices are involved in the call?<br>what codecs do the devices at the central site use and what are the<br>model numbers of the phones in use? they don't all support iLBC.<br>what device pool/region is the transcoder in and what is configured<br>
between that region and the central and remote site regions?<br><br>-Peter<br><br>On Wed, Nov 19, 2008 at 12:25 PM, Anthony Kouloglou <<a href="mailto:akoulgr@gmail.com" target="_blank">akoulgr@gmail.com</a>> wrote:<br>
</pre>
<blockquote type="cite"><pre>Hi,<br>1. i have configured an Enhanced IOS transcoder to be used by several remote<br>devices that want to use iLBC with the central site.<br>2. The sccp transcoder is registered with the CUCM 6.1 ok. (ilbc is included<br>
in the sccp profile)<br>3. I have configured 2 regions one for the central site and one for the<br>remote. Audio codec between them is iLBC.<br>4. I have configured a media resource group containing only the above<br>transcoder.<br>
5. I have also configured 2 device pools: each pool has one region of the<br>above (step 3)<br><br>What must the media resource list be like in order for the configuration to<br>work?<br>What is the meaning of assigning a device pool inside the transcoder since<br>
the transcoder is in a MRGL which inturn is used by a device pool?<br><br>Thanks a lot<br>Anthony<br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br><br></pre></blockquote>
</blockquote>
</div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>