<div><font color="#3366ff">I'm now having an issue with the module constatly re booting after running the 'service-module service-engine 1/0 session'.command itr gets to the Enter Administrator user ID and then reboots and goes through the initializing process again. Anyone had this before could the module be faulty?</font></div>
<div> </div>
<div> </div>
<div>IMPORTANT::</div>
<div>Enter administrator user ID:<br> (user ID):<br>MONITOR SHUTDOWN...<br>INIT: Sending processes the TERM signal<br>Restarting system.<br>Brd1 Nmi Npx0 Dly P92 Sha0 Kbd0 Cmos Pci Dma0 PrtB Tim Exp Rfsh Geom</div>
<div>Initializing memory. Please wait. Mem0 Mem1 Ebda Sha1 CacheE Admgr1 Memmgr1 AdmgrEbda Media LowBi</div>
<div>Swap to secondary BIOS ... Mem1 Ebda Sha1 CacheE Admgr1 Memmgr1 AdmgrEbda Media LowBios Brd2 Cache<br>Par PciEnum Vid1 Redir Brd6 Com KbdBuf SMM<br>General Software Firmbase[r] SMM Kernel 1.3.2 Feb 11 2005 11:51:07<br>
Intel(R) E7320 Performance Development Platform</div>
<div><br>EIST: Enhanced Intel Speedstep Driver, V3.0.<br>EIST: Copyright (C) 2003-2006 General Software, Inc.<br>EIST: Built Mar 3 2006, 14:49:27<br>UsbHid Pwd Msg0 Msg1 Cache1 Mem2 Prot Cache2 Flg Siz0 Msg2 Ata Dsk Npx1 Apm Err Dbg Enb App MemRed<br>
Com Admgr2 Cfg Brd10<br>DDR2 Memory 511 MB with ECC detected<br>Intel(R) Celeron(R) M processor 1.00GHz<br>BIOS ISE 5.00, Build date: 05/05/06<br>System Now Booting ...</div>
<div>704 832 968 1040 1172 1184 1196 1208 1220 1228 1240 1260 1276 1288 1304 1320 1332 1348 1368 1380 1<br>eturned:33<br>9b60745366cf54abffdb993a9f39e5fd</div>
<div><br>Booting from Secure secondary boot loader..., please wait.</div>
<div>[BOOT-ASM]</div>
<div><br>Please enter '***' to change boot configuration:<br>ACPI: Unable to locate RSDP<br>kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"<br>kdb_cmd[6]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"<br>
kdb_cmd[12]: defcmd archkdbshort "" "archkdb with less detailed backtrace"<br>kdb_cmd[18]: defcmd archkdbcommon "" "Common arch debugging"<br>in atrace_init<br>Using existing trace log<br>
e1000_setup_copper_link: forced mode continue 1<br>ide1: I/O resource 0x170-0x177 not free.<br>ide1: ports already in use, skipping probe<br>ata1: disabling port<br>Verifying application level programs<br>Application level programs verification OK!<br>
INIT: version 2.86 booting<br>Started device management daemon v1.3.25 for /dev<br>mounting sys fs ...<br>mounting /dev/shm tmpfs ...<br>mounting /proc/bus/usb ...<br>reiser root fs ...</div>
<div>Filesystem seems mounted read-only. Skipping journal replay.<br>Checking internal tree..finished<br>Reiserfs super block in block 16 on 0x801 of format 3.6 with standard journal<br>Blocks (total/free): 19537040/19464270 by 4096 bytes<br>
Reiserfs super block in block 16 on 0x801 of format 3.6 with standard journal<br>Blocks (total/free): 19537040/19464270 by 4096 bytes</div>
<div>FILESYSTEM CLEAN<br>Remounting the root filesystem read-write...</div>
<div>Power button monitor started<br>kernel.sem = 1900 32000 32 128<br>vm.overcommit_memory = 1</div>
<div><br> Welcome to Cisco Service Engine</div>
<div><br>********** rc.aesop ****************<br>rsrc_file:/etc/bryce_rsrc_file<br>Populating resource values from /etc/bryce_rsrc_file<br>==> Start quack<br>rsrc_file:/etc/default_rsrc_file<br>Populating resource values from /etc/default_rsrc_file<br>
rsrc_file:/etc/products/cue/default_rsrc_file<br>Populating resource values from /etc/products/cue/default_rsrc_file<br>entry : change cli_server:standalone:int32:0<br>rsrc_file:/etc/products/cue/bryce_rsrc_file<br>Populating resource values from /etc/products/cue/bryce_rsrc_file<br>
Processing: /sw/installed/manifest/en_GB_lang_manifest.sig<br>Processing: /sw/installed/manifest/gpl_infrastructure_manifest.sig<br>Processing: /sw/installed/manifest/thirdparty_infrastructure_manifest.sig<br>Processing: /sw/installed/manifest/installer_manifest.sig<br>
Processing: /sw/installed/manifest/oscore_manifest.sig<br>Processing: /sw/installed/manifest/telephony_infrastructure_manifest.sig<br>Processing: /sw/installed/manifest/bootloader_prim_manifest.sig<br>Processing: /sw/installed/manifest/lang_support_manifest.sig<br>
Processing: /sw/installed/manifest/bootloader_sec_manifest.sig<br>Processing: /sw/installed/manifest/global_manifest.sig<br>Processing: /sw/installed/manifest/infrastructure_manifest.sig<br>Processing: /sw/installed/manifest/voicemail_manifest.sig<br>
Populating internal database ...................................................... complete.<br>==> Management interface is eth0</div>
<div>==> Management interface is eth0</div>
<div>Serial Number: FOC12420D29<br>Size of buff is: 65536<br>65536 bytes written<br>Reading License... Parsing...<br>200 MAILBOX LICENSE<br>Parsing...<br>NULL IVR LICENSE<br>Parsing...<br>8 PORT BASE LICENSE<br>Core:<br>
- Total usable system ports: 8</div>
<div>/tmp/license/voicemail_lic.sig<br>/tmp/license/ivr_lic.sig<br>/tmp/license/port_lic.sig<br>done<br>Reading Limits...<br>Processing: /lib/python2.3/startup/limits.xml<br>Processing: /bin/products/cue/limits.xml<br>done<br>
INIT: Entering runlevel: 2<br>********** rc.post_install ****************<br>INIT: Switching to runlevel: 4<br>INIT: Sending processes the TERM signal<br>STARTED: ntp_startup.sh<br>STARTED: LDAP_startup.sh<br>STARTED: SQL_startup.sh<br>
STARTED: dwnldr_startup.sh<br>STARTED: HTTP_startup.sh<br>STARTED: probe<br>STARTED: superthread_startup.sh<br>STARTED: ${ROOT}/usr/wfavvid/run</div>
<div>Booting: [#######################>...................................] 38% waiting 74 ...<br>MONITOR SHUTDOWN...<br>Booting: [###########################################################>] 100% waiting 75 ...</div>
<div>IMPORTANT::<br>IMPORTANT:: Administrator Account Creation<br>IMPORTANT::<br>IMPORTANT:: Create an administrator account. With this account,<br>IMPORTANT:: you can log in to the Cisco Unity Express GUI and<br>
IMPORTANT:: run the initialization wizard.<br>IMPORTANT::</div>
<div>Enter administrator user ID:<br>INIT: Sending processes the TERM signal<br>Restarting system.</div>
<div><br><br><br> </div>
<div class="gmail_quote">2008/11/25 Nick <span dir="ltr"><<a href="mailto:csvoip@googlemail.com">csvoip@googlemail.com</a>></span><br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Thanks Bill, I'm now configuring the module and should hopefully be able to get on soon.<br><br>
<div class="gmail_quote">2008/11/25 Bill Talley <span dir="ltr"><<a href="mailto:billt@aos5.com" target="_blank">billt@aos5.com</a>></span><br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>
<div></div>
<div class="Wj3C7c">
<div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">Just trying not to make an assumption that all setup has been completed. Have you done setup on the cue module itself? You won't be able to use the gui until cue has been initialized.</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">To initialize the cue module, from the router, execute the command 'service-module service-engine 1/0 session'.</font></span></div><br>
<div lang="en-us" dir="ltr" align="left">
<hr>
<font face="Tahoma" size="2"><b>From:</b> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Nick<br>
<b>Sent:</b> Tuesday, November 25, 2008 8:52 AM<br><b>To:</b> <a href="mailto:cisco-voip@puck-nether.net" target="_blank">cisco-voip@puck-nether.net</a><br><b>Subject:</b> [cisco-voip] CUE GUI<br></font><br></div>
<div>
<div></div>
<div>
<div></div>
<div>I have a 2851 with CUE-NME module installed on IOS c2800nm-ipvoicek9-mz.124-15.T7, I have configured the module as shown</div>
<div> </div>
<div>interface Integrated-Service-Engine1/0<br> ip unnumbered GigabitEthernet0/0<br> service-module ip address <a href="http://10.196.243.14/" target="_blank">10.196.243.14</a> <a href="http://255.255.255.0/" target="_blank">255.255.255.0</a><br>
service-module ip default-gateway <a href="http://10.196.243.1/" target="_blank">10.196.243.1</a><br> no keepalive<br>!</div>
<div>ip route <a href="http://10.196.243.14/" target="_blank">10.196.243.14</a> <a href="http://255.255.255.255/" target="_blank">255.255.255.255</a> Integrated-Service-Engine1/0</div>
<div> </div>
<div>I have also enable sip-ua and added a sip dial-peer, what should the destination -pattern point to under this dialpeer?</div>
<div> </div>
<div>I can ping the module but I am unable to browse to the GUI, can anyone help with what I could be missing?</div>
<div> </div>
<div> </div>
<div> </div></div></div></div><br><br><br><br></div></div>CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.<br>
<br>Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.<br>
<br></blockquote></div><br></blockquote></div><br>