<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.6000.16735" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=531153615-25112008><FONT face=Arial
color=#0000ff size=2>Just trying not to make an assumption that all setup has
been completed. Have you done setup on the cue module itself?
You won't be able to use the gui until cue has been
initialized.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=531153615-25112008><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=531153615-25112008><FONT face=Arial
color=#0000ff size=2>To initialize the cue module, from the router, execute the
command 'service-module service-engine 1/0 session'.</FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of
</B>Nick<BR><B>Sent:</B> Tuesday, November 25, 2008 8:52 AM<BR><B>To:</B>
cisco-voip@puck-nether.net<BR><B>Subject:</B> [cisco-voip] CUE
GUI<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV>I have a 2851 with CUE-NME module installed on
IOS c2800nm-ipvoicek9-mz.124-15.T7, I have configured the module as
shown</DIV>
<DIV> </DIV>
<DIV>interface Integrated-Service-Engine1/0<BR> ip unnumbered
GigabitEthernet0/0<BR> service-module ip address <A
href="http://10.196.243.14">10.196.243.14</A> <A
href="http://255.255.255.0">255.255.255.0</A><BR> service-module ip
default-gateway <A href="http://10.196.243.1">10.196.243.1</A><BR> no
keepalive<BR>!</DIV>
<DIV>ip route <A href="http://10.196.243.14">10.196.243.14</A> <A
href="http://255.255.255.255">255.255.255.255</A>
Integrated-Service-Engine1/0</DIV>
<DIV> </DIV>
<DIV>I have also enable sip-ua and added a sip dial-peer, what should the
destination -pattern point to under this dialpeer?</DIV>
<DIV> </DIV>
<DIV>I can ping the module but I am unable to browse to the GUI, can anyone help
with what I could be missing?</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV></BODY></HTML>