I've used this provider for lab testing and it works ok. Since you are doing inbound DID service only, they will initiate the SIP communication and with that provider no authentication is needed.<br><br>just make sure you PAT TCP:5060 on the internet router to the IP address of your CUCM box. (For security purposes, I would put a firewall rule that only allowed TCP:5060 traffic from the your SIP provider IP addresses.)<br>
<br>You'll just need to make sure that the internet/PAT router is SIP aware /ALG/fixup/etc. Also make sure your internal environment is setup to support RFC2833 DTMF.<br><br>Justin<br><br><br><br><div class="gmail_quote">
On Mon, Dec 1, 2008 at 9:29 PM, Dane Newman <span dir="ltr"><<a href="mailto:dane.newman@gmail.com">dane.newman@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div><a href="http://www.ipcomms.net/html/FREEDID_Landing2.htm" target="_blank">http://www.ipcomms.net/html/FREEDID_Landing2.htm</a> </div>
<div> </div>
<div>I bought the FreeDID package They asked for my ip (so I was hoping this is how they are authenticating me) and if you can see from the features
<p style="margin: 0px;"><span style="font-size: 9pt; font-family: Arial;">SIP Username/Password Registration is listed N/A so i think that means I am not doing sip authentication right?</span></p></div><div><div></div><div class="Wj3C7c">
<p style="margin: 0px;"><br><br></p>
<div class="gmail_quote">On Mon, Dec 1, 2008 at 8:58 PM, Lelio Fulgenzi <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;">
<div>
<div style="font-size: 10pt; color: rgb(0, 0, 0); font-family: Verdana;">Wes replied earlier regarding authentication. I got the impression that if you need to do SIP auth you'll need a more robust SIP proxy/server/box.<br>
<br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
"Bad grammar makes me [sic]" - Tshirt
<div>
<div></div>
<div><br><br><br>----- Original Message -----<br>From: "Dane Newman" <<a href="mailto:dane.newman@gmail.com" target="_blank">dane.newman@gmail.com</a>><br>To: <a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a><br>
Cc: "Mark Holloway" <<a href="mailto:mh@markholloway.com" target="_blank">mh@markholloway.com</a>>, "<<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>>" <<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
Sent: Monday, December 1, 2008 8:47:51 PM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] SIP trunk CUCM 7<br><br>I am on a rfc 1918 address but I am going to nat a pubic address to the CUCM on the internet router . I only have a cisco 1811w at the site so If I need CUBE I will have to upgrade the router ugh....so is it possible to do this without CUBE? I thought I could just nat a public ip address to the gateway and cucm would be able to support the trunk ( this is my first time setting up a CUCM so I am a bit new at this)<br>
<br>
<div class="gmail_quote">On Mon, Dec 1, 2008 at 5:34 PM, <span dir="ltr"><<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;">
<div>
<div>I think native SIP trunks are supported as far back as 4.x (we're using one on 4.1) but it all depends on the feature set and visibility. For example, if you're on a privately adressed VLAN you'll need CUBE or something similar. <br>
<br>Lelio Fulgenzi, <span>Senior Analyst</span>
<div><span>Computing & Communications</span></div>
<div><span>University of Guelph</span></div>
<div><span>519-824-4120 x56354</span></div>
<div><span><br></span></div>
<div><span>...sent from my iPod - please pardon my fat fingers ;) </span></div>
<div><span><br></span></div>
<div><span>[XKJ2000]</span></div></div>
<div>
<div></div>
<div>
<div><br>On Dec 1, 2008, at 5:31 PM, Dane Newman <<a href="mailto:dane.newman@gmail.com" target="_blank">dane.newman@gmail.com</a>> wrote:<br><br></div>
<div></div>
<blockquote>
<div>
<div>Please correct me if I am wrong but I thought cucm had the ability to support sip trunks native in 7?<br><br>Sent from my iPhone</div>
<div><br>On Dec 1, 2008, at 2:44 PM, "Mark Holloway" <<a href="mailto:mh@markholloway.com" target="_blank"></a><a href="mailto:mh@markholloway.com" target="_blank">mh@markholloway.com</a>> wrote:<br><br></div>
<div></div>
<blockquote>
<div>
<div>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">I haven't had a chance to explore CUCM 7 yet, but I think you will need a back to back user agent like CUBE or Ingate's SIPerator.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank"></a><a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank"></a><a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">mailto:cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Dane Newman<br>
<b>Sent:</b> Monday, December 01, 2008 10:58 AM<br><b>To:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank"></a><a href="mailto:cisco-voip@puck.nether.net" target="_blank"></a><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> [cisco-voip] SIP trunk CUCM 7</span></p></div>
<p> </p>
<p>I just purchased a sip trunk from <a href="http://ipcomms.net/" target="_blank">ipcomms.net</a> does anyone have instructions how to configure it to work with CUCM 7?</p></div></div></blockquote></div></blockquote></div>
</div>
<blockquote>
<div><span>_______________________________________________</span><br><span>cisco-voip mailing list</span>
<div><br><span><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a></span><br></div>
<div><span><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></span><br></div></div></blockquote></div></blockquote></div><br></div></div>
</div></div></blockquote></div><br>
</div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>