<br><font size=2 face="sans-serif">A few fun dial-peer questions.</font>
<br>
<br><font size=2 face="sans-serif">The Request:</font>
<br><font size=2 face="sans-serif">Add prefix 179697 to all outgoing Long
Distance calls. </font>
<br>
<br><font size=2 face="sans-serif">Added dial-peer voice 104 pots to current
configuration for request.</font>
<br>
<br><font size=2 face="sans-serif">dial-peer voice 102 pots</font>
<br><font size=2 face="sans-serif"> translation-profile incoming 12</font>
<br><font size=2 face="sans-serif"> translation-profile outgoing 11</font>
<br><font size=2 face="sans-serif"> destination-pattern .T</font>
<br><font size=2 face="sans-serif"> progress_ind alert enable 8</font>
<br><font size=2 face="sans-serif"> incoming called-number .</font>
<br><font size=2 face="sans-serif"> direct-inward-dial</font>
<br><font size=2 face="sans-serif"> port 0/1/0:15</font>
<br><font size=2 face="sans-serif">! </font>
<br><font size=2 face="sans-serif">dial-peer voice 103 pots</font>
<br><font size=2 face="sans-serif"> translation-profile outgoing 11</font>
<br><font size=2 face="sans-serif"> destination-pattern 9T</font>
<br><font size=2 face="sans-serif"> incoming called-number .</font>
<br><font size=2 face="sans-serif"> direct-inward-dial</font>
<br><font size=2 face="sans-serif"> port 0/1/0:15</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">dial-peer voice 104 pots</font>
<br><font size=2 face="sans-serif"> translation-profile outgoing 11</font>
<br><font size=2 face="sans-serif"> destination-pattern 9[^1-9]T</font>
<br><font size=2 face="sans-serif"> progress_ind alert enable 8</font>
<br><font size=2 face="sans-serif"> incoming called-number .</font>
<br><font size=2 face="sans-serif"> direct-inward-dial</font>
<br><font size=2 face="sans-serif"> port 0/1/0:15</font>
<br><font size=2 face="sans-serif"> prefix 179697</font>
<br>
<br><font size=2 face="sans-serif">My questions:</font>
<br>
<br><font size=2 face="sans-serif">1. destination-pattern 9[^1-9]T
is the same as destination-pattern 90T?</font>
<br><font size=2 face="sans-serif">2. Will I need to add a preference
command to dial-peer 102 so that 104 is hit first?</font>
<br><font size=2 face="sans-serif">3. During testing, I noticed that
the 9 is being stripped. destination-pattern 0T catches LD calls.</font>
<br><font size=2 face="sans-serif"> This
makes sense but where is the 9 being stripped at? Feel terrible for
asking this question.</font>
<br><font size=2 face="sans-serif"> Call
Manager DNA below:</font>
<br>
<br><font size=2 face="sans-serif">Dialed Number Analyzer using 902110086</font>
<br><font size=2 face="sans-serif">* Route List :Route List Name= PEK0_RL</font>
<br><font size=2 face="sans-serif"> o RouteGroup :RouteGroup
Name= PEK0_RG</font>
<br><font size=2 face="sans-serif">
+ PreTransform Calling Party Number = 78922</font>
<br><font size=2 face="sans-serif">
+ PreTransform Called Party Number = 902110086</font>
<br><font size=2 face="sans-serif">
+ Calling Party Transformations</font>
<br><font size=2 face="sans-serif">
# External Phone Number Mask = Default</font>
<br><font size=2 face="sans-serif">
# Calling Party Mask =</font>
<br><font size=2 face="sans-serif">
# Prefix =</font>
<br><font size=2 face="sans-serif">
# Calling Party Number = 78922</font>
<br><font size=2 face="sans-serif">
+ Called Party Transformations</font>
<br><font size=2 face="sans-serif">
# Called Party Mask =</font>
<br><font size=2 face="sans-serif">
# Discard Digits Instructions =</font>
<br><font size=2 face="sans-serif">
# Prefix =</font>
<br><font size=2 face="sans-serif">
# Called Number = 902110086</font>
<br>
<br><font size=2 face="sans-serif">4. Does the "show voice call
status" command only show the last 10 digits of the Called #?</font>
<br><font size=2 face="Courier">CallID CID ccVdb
Port DSP/Ch Called
# Codec Dial-peers</font>
<br><font size=2 face="Courier">0x32EF 5DF 0x68497074
0/1/0:15.31 0/1:1 *5582080391 g711ulaw 100/102</font>
<br>
<br>
<br><font size=2 face="sans-serif">Thanks!</font>
<br><font size=2 face="sans-serif"><br>
Steve </font>
<P>
<HR>
This e-mail message and all attachments transmitted with it may contain legally
privileged and/or confidential information intended solely for the use of the
addressee(s). If the reader of this message is not the intended recipient, you
are hereby notified that any reading, dissemination, distribution, copying,
forwarding or other use of this message or its attachments is strictly
prohibited. If you have received this message in error, please notify the sender
immediately and delete this message and all copies and backups thereof.</P>
<P>Thank you.<BR>
<HR>
<P></P>