you should remove the 'direct-inward-dial' command from your 618 POTS dialpeer. you're running T1 CAS, it doesnt like that cmd.<br><br><div class="gmail_quote">On Sat, Dec 6, 2008 at 2:02 AM, cisco.voip <span dir="ltr"><<a href="mailto:cisco.voip@verizon.net">cisco.voip@verizon.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">I have Phone - PBX -- Cisco2811 H323 GW --- Cisco CCM v4.2 --- IP Phone1<br>
<br>
THe PBX places the call to 6175212001, I match the inbound pots dialpeer (from debug)<br>
but the call never matches the outgoing voip dialpeer to go to the CCM and ring the phone on the call manager?<br>
<br>
dial-peer voice 617 voip (Need call to go to CCM)<br>
destination-pattern 6175212...<br>
session target ipv4:<a href="http://10.1.200.21" target="_blank">10.1.200.21</a><br>
no vad<br>
!<br>
dial-peer voice 618 pots (Call in from PBX)<br>
incoming called-number 6175212...$<br>
direct-inward-dial<br>
port 2/0:0<br>
forward-digits all<br>
<br>
Dec 5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:<br>
Calling Number=, Called Number=, Voice-Interface=0x65497FB0,<br>
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,<br>
Peer Info Type=DIALPEER_INFO_SPEECH<br>
Dec 5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:<br>
Match Rule=DP_MATCH_PORT;<br>
Dec 5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:<br>
Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=618<br>
Dec 5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerSPI:exit@5938<br>
<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br><font color="#888888">
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</font></blockquote></div><br>