<div>I guess you can put in what ever you are getting as domain name and it may not be fully qualified domain. Wes or Ryan can confirm the same. I believe this was put in 6.x onwards to support sip domain routing using sip route patterns and DA looks at them for inbound calls as well.</div>
<div> </div>
<div> </div>
<div>Aman<br><br></div>
<div class="gmail_quote">On Fri, Dec 12, 2008 at 12:12 PM, Erick Bergquist <span dir="ltr"><<a href="mailto:erickbee@gmail.com">erickbee@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Okay. Do you know if it has to be qualified domain name or can you put<br>whatever name the provider is sending in those fields (the value they<br>
sent was cust1234 for example and not a domain name)? The second field<br>(not top level) from the help you can do different names seperated by<br>commas.<br><br>We had provider change the value to be the IP Address of the CUCM<br>
which fixed the problem without having to set this field but next time<br>I know where to go look and try to get it working.<br><br>Thanks.<br>
<div class="Ih2E3d"><br>On Thu, Dec 11, 2008 at 2:42 PM, Aman Chugh <<a href="mailto:aman.chugh@gmail.com">aman.chugh@gmail.com</a>> wrote:<br>><br></div>
<div>
<div></div>
<div class="Wj3C7c">> Erick,<br>><br>> I had a similar issue working on a Nortel to CUCM 6.1 integration sometime<br>> back. CUCM 6 onwards , sip domain routing is used in DA. I had to set the<br>> sip top level organization domain in CUCM in enterprise parameters to get<br>
> it corrected. I remember posting this on the list as well.<br>><br>> <a href="http://www.gossamer-threads.com/lists/cisco/voip/98740?search_string=sip%20domain;#98740" target="_blank">http://www.gossamer-threads.com/lists/cisco/voip/98740?search_string=sip%20domain;#98740</a><br>
><br>> HTH<br>><br>> Aman<br>> On Tue, Dec 9, 2008 at 10:26 PM, Erick Bergquist <<a href="mailto:erickbee@gmail.com">erickbee@gmail.com</a>> wrote:<br>>><br>>> Kind of new to SIP, is there a setting in CUCM 6.12 somewhere to match<br>
>> provider where SIP trunk is coming from? The IP address on the SIP<br>>> trunk destination matches the providers IP address but they are using<br>>> name for npdi.<br>>><br>>> Snippets from CCM traces,<br>
>><br>>> INVITE sip:1234567;npdi@SIPprovider:5060;user=phone SIP/2.0<br>>><br>>> then below this,<br>>><br>>> CCM|Digit Analysis: Host Address=SIPprovider DOES NOT MATCH any<br>>> address for this cluster.<br>
>> CCM|Digit Analysis: Host Address=SIPprovider DOES NOT MATCH top level<br>>> org domain.<br>>><br>>> Thanks<br>>> _______________________________________________<br>>> cisco-voip mailing list<br>
>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
><br>><br></div></div></blockquote></div><br>