<p class="MsoNormal" style="MARGIN: 0in 0in 0pt"><span style="FONT-SIZE: 11pt; COLOR: #1f497d; FONT-FAMILY: 'Calibri','sans-serif'">Can anyone tell me how to wire this to the FXO? I think I have it correct but it is not working. On the Valcom system I have Tip1 Ring1 Control1 Control1 . I have the tip and ring in the middle pair on the RJ-11 and the control on the outside pair. I get a fast busy when I call to the system. </span></p>
<br><br>
<div class="gmail_quote">On Thu, Dec 11, 2008 at 7:53 PM, Truelove_John <span dir="ltr"><<a href="mailto:JTruelove@aetinc.com">JTruelove@aetinc.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>
<p><font size="2">I have. FXO to 2 Valcom 9963s.<br><br>I have had the Valcom 9963 lock up a couple of times which stops paging.<br>Rebooting 9963 fixes the problems.<br>I put the Valcom 9963s and Valcom 2006A on a power strip to quickly power cycle.<br>
<br>We do a lot of paging 10,000+ pages per month on those units.<br><br>No problems with disconnects. I did have to adjust the gain on the FXO ports<br>for volume out to the 9963s.
<div>
<div></div>
<div class="Wj3C7c"><br><br><br><br>-----Original Message-----<br>From: <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> on behalf of Voice Noob<br>Sent: Thu 12/11/2008 4:22 PM<br>
To: <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>Subject: [cisco-voip] Valcom Paging<br><br>I have a customer that has a Valcom V-2924A with a Valcom V-9963 Digital<br>Feedback Eliminator<br>
<br>What type of connection would I use on the router? FXS or FXO ? Has anyone<br>integrated with these? Are there any problems with disconnect or anything<br>else to watch out for. Thanks for your help.<br><br><br><br><br>
<br><br></div></div></font>
<p></p></p></div></blockquote></div><br>