Hi,<br><br><br>1. 400 route patterns in call manager<br>2. User demands , I want to block caller ID on each patterns.<br><br><br>Q1: What is the best way to do this apart from creating 2 patterns for each routes, hence 800 patterns - 400 simple and 400 with blocking caller ID.<br>
<br>Alternate to above for same scenario:<br><br>Q2: PSTN switch environment;<br><br>If those 400 route patterns are dialed with 1777 prefixes (e.g. user dials 1777+[2-9]xxxxxxx). PSTN switch gets 1777[2-9]xxxxxxx and PSTN switch blocks calls<br>
Here again, the challenge is to achieve this with a single route-pattern.<br><br>I looked through the option, like - Application dial-rule, Directory lookup rules but can't see any optino there.<br><br>the logic i am after:<br>
<br>Route-pattern1: 9.[2-9]xxxxxxxx <simple dial><br>route-pattern2: 9.1777[2-9]xxxxxxx , pstn switch sees 1777[2-9]xxxxxxx and blocks caller id<br><br>Can this be done with just creating a route pattern (one) and then adding some sort of application rule or any other ccm features?<br>
<br>I can't think of anything...<br><br>-- <br>Smile, you'll save someone else's day!<br>Frog<br>