<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>Is it plugged in? I think I recall unless it's plugged in, it won't register.<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Tim Reimers" <treimers@ashevillenc.gov><br>To: cisco-voip@puck.nether.net<br>Sent: Friday, February 13, 2009 2:40:55 PM GMT -05:00 US/Canada Eastern<br>Subject: [cisco-voip] Registration rejected on a single FXO port of an MGCP 2801 with a 2FXO card?<br><br>
<div><font size="2" face="Arial"></font> </div>
<div><span class="463212919-13022009"><font size="2" face="Arial">What in the world
could be causing this?</font></span></div>
<div><span class="463212919-13022009"><font size="2" face="Arial">I've had
registration issues with MGCP equipment in the past, being hostname/domain-name
related</font></span></div>
<div><span class="463212919-13022009"><font size="2" face="Arial">That makes the
entire device not register.</font></span></div>
<div><span class="463212919-13022009"><font size="2" face="Arial"></font></span> </div>
<div><span class="463212919-13022009"><font size="2" face="Arial">But I've never seen
one port get rejected and the other one not!</font></span></div>
<div><span class="463212919-13022009"><font size="2" face="Arial">Weird.</font></span></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">Product Cisco MGCP FXO Port <br>Gateway
TransitGW2801.mydomain.local <br>Device Protocol Analog Access <br>Registration
Rejected <br>IP Address 192.168.XXX.252 <br>End-Point Name <a href="mailto:AALN/S0/SU0/0@TransitGW2801.mydomain.local" target="_blank">AALN/S0/SU0/0@TransitGW2801.mydomain.local</a>
</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">Product Cisco MGCP FXO Port <br>Gateway
TransitGW2801.mydomain.local <br>Device Protocol Analog Access <br>Registration
Registered with Cisco Unified Communications Manager 192.168.200.6 <br>IP
Address 192.168.XXX.252 <br>End-Point Name <a href="mailto:AALN/S0/SU0/1@TransitGW2801.mydomain.local" target="_blank">AALN/S0/SU0/1@TransitGW2801.mydomain.local</a>
</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font><font size="2" face="Arial"></font><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">Everything is
identical in the CCM (UCM 6.01)</span></font></div>
<div><font size="2" face="Arial"><span class="463212919-13022009">both ports are
configured EXACTLY the same way...</span></font></div>
<div><font size="2" face="Arial"><span class="463212919-13022009"></span></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009"></span></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009"></span></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">What the heck is
going on?</span></font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">more
info:</span></font></div>
<div><font size="2" face="Arial"></font> </div>
<div><br><span class="463212919-13022009"><font size="2" face="Arial">Config on the
router:</font></span></div>
<div><span class="463212919-13022009">voice-port 0/0/0<br> supervisory
disconnect dualtone mid-call<br> echo-cancel coverage 32<br> timeouts
call-disconnect 5<br> timeouts wait-release 5<br> timing hookflash-out
50<br>!<br>voice-port 0/0/1<br> supervisory disconnect dualtone
mid-call<br> echo-cancel coverage 32<br> timeouts call-disconnect
5<br> timeouts wait-release 5<br> timing hookflash-out
50<br>!<br>ccm-manager switchback immediate<br>ccm-manager
fallback-mgcp<br>ccm-manager redundant-host 192.168.200.2<br>ccm-manager
mgcp<br>no ccm-manager fax protocol cisco<br>ccm-manager
music-on-hold<br>ccm-manager config server 192.168.200.2<br>!<br>mgcp<br>mgcp
call-agent 192.168.200.6 service-type mgcp version 0.1<br>mgcp dtmf-relay voip
codec all mode out-of-band<br>mgcp rtp unreachable timeout 1000 action
notify<br>mgcp modem passthrough voip mode nse<br>mgcp package-capability
rtp-package<br>no mgcp package-capability res-package<br>mgcp package-capability
sst-package<br>no mgcp package-capability fxr-package<br>no mgcp timer
receive-rtcp<br>mgcp sdp simple<br>mgcp fax t38 inhibit<br>mgcp rtp payload-type
g726r16 static<br>mgcp bind control source-interface FastEthernet0/0<br>mgcp
bind media source-interface FastEthernet0/0<br>!<br>mgcp profile
default</span></div>
<div><font size="2" face="Arial"></font> </div>
<div>
<div><font size="2" face="Arial"><span class="463212919-13022009"></span></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">dial-peer voice
99900 pots<br> service mgcpapp<br> port 0/0/1<br>!<br>dial-peer voice
99901 pots<br> service mgcpapp<br> port 0/0/1<br>!<br>dial-peer voice
2000 voip<br> incoming called-number .<br> dtmf-relay
h245-alphanumeric<br> codec g711ulaw<br> no
vad</span></font></div></div>
<div><font size="2" face="Arial"></font> </div>
<div><font face="Arial"><font size="2"><span class="463212919-13022009">Running:
</span>c2801-spservicesk9-mz.124-9.T7.bin</font></font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">TransitGW2801#sh
mgcp endpoint<br><a href="mailto:aaln/S0/SU0/1@TransitGW2801" target="_blank">aaln/S0/SU0/1@TransitGW2801</a></span></font></div>
<div><font size="2" face="Arial"><span class="463212919-13022009"></span></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009"></span></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">That output should
ALSO show</span></font></div>
<div><font size="2" face="Arial"><span class="463212919-13022009"><a href="mailto:aaln/S0/SU0/0@TransitGW2801" target="_blank">aaln/S0/SU0/0@TransitGW2801</a></span></font></div>
<div><font size="2" face="Arial"><span class="463212919-13022009"></span></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">and would show it, I
think, if the port registered.</span></font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">TransitGW2801#sh voice port
summary<br>
IN
OUT<br>PORT
CH SIG-TYPE ADMIN OPER STATUS
STATUS EC<br>============== == ============ ===== ==== ========
======== ==<br>0/0/0
-- fxo-ls up dorm
idle on-hook
y<br>0/0/1 --
fxo-ls up dorm
idle on-hook y</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">TransitGW2801#sh mgcp statistics<br> UDP pkts
rx 828, tx 828<br> Unrecognized rx pkts 0, MGCP message parsing errors
0<br> Duplicate MGCP ack tx 0, Invalid versions count 0<br> CreateConn
rx 5, successful 0, failed 5<br> DeleteConn rx 5, successful 5, failed
0<br> ModifyConn rx 0, successful 0, failed 0<br> DeleteConn tx 0,
successful 0, failed 0<br> NotifyRequest rx 12, successful 11, failed
1<br> AuditConnection rx 0, successful 0, failed 0<br> AuditEndpoint
rx 1, successful 1, failed 0<br> RestartInProgress tx 1, successful 1,
failed 0<br> Notify tx 804, successful 804, failed 0<br> ACK tx 17,
NACK tx 6<br> ACK rx 805, NACK rx 0</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"> IP address based Call Agents
statistics:<br> IP address 192.168.200.6, Total msg rx
828,<br>
successful 822, failed 6<br> System resource check is DISABLED. No
available statistic</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"> DS0 Resource
Statistics<br> -----------------------<br> Utilization: 0.00
percent<br> Total channels: 1<span class="463212919-13022009">
< This would appear to just confirm the fact that only one port registered,
not be a source of the problem</span><br> Addressable channels:
1<br> Inuse channels: 0<br> Disabled channels: 0<br> Free
channels: 1</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"><span class="463212919-13022009">## Both ports
exist--- both are admin UP, with no failures, both are Loop
Start</span></font></div>
<div><font size="2" face="Arial"><span class="463212919-13022009">So it's not
something confused with the hardware. </span></font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial">TransitGW2801#sh voice port</font></div>
<div> </div>
<div><font size="2" face="Arial">Foreign Exchange Office 0/0/0 Slot is 0, Sub-unit
is 0, Port is 0<br> Type of VoicePort is FXO<br> Operation State is
DORMANT<br> Administrative State is UP<br> No Interface Down
Failure<br> Description is not set<br> Noise Regeneration is
enabled<br> Non Linear Processing is enabled<br> Non Linear Mute is
disabled<br> Non Linear Threshold is -21 dB<br> Music On Hold
Threshold is Set to -38 dBm<br> In Gain is Set to 0 dB<br> Out
Attenuation is Set to 3 dB<br> Echo Cancellation is enabled<br> Echo
Cancellation NLP mute is disabled<br> Echo Cancellation NLP threshold is
-21 dB<br> Echo Cancel Coverage is set to 32 ms<br> Echo Cancel worst
case ERL is set to 6 dB<br> Playout-delay Mode is set to
adaptive<br> Playout-delay Nominal is set to 60 ms<br> Playout-delay
Maximum is set to 250 ms<br> Playout-delay Minimum mode is set to default,
value 40 ms<br> Playout-delay Fax is set to 300 ms<br> Connection Mode
is normal<br> Connection Number is not set<br> Initial Time Out is set
to 10 s<br> Interdigit Time Out is set to 10 s<br> Call Disconnect
Time Out is set to 5 s<br> Ringing Time Out is set to 180 s<br> Wait
Release Time Out is set to 5 s<br> Companding Type is u-law<br> Region
Tone is set for US</font></div>
<div> </div>
<div><font size="2" face="Arial"> Analog Info Follows:<br> Currently
processing none<br> Maintenance Mode Set to None (not in mtc
mode)<br> Number of signaling protocol errors are 0<br> Impedance is
set to 600r Ohm<br> Station name None, Station number
None<br> Translation profile (Incoming):<br> Translation profile
(Outgoing):</font></div>
<div> </div>
<div><font size="2" face="Arial"> Voice card specific Info
Follows:<br> Signal Type is loopStart<br> Battery-Reversal is
enabled<br> Number Of Rings is set to 1<br> Supervisory Disconnect is
dualtone mid-call<br> Answer Supervision is inactive<br> Hook Status
is On Hook<br> Ring Detect Status is inactive<br> Ring Ground Status
is inactive<br> Tip Ground Status is inactive<br> Dial Out Type is
dtmf<br> Digit Duration Timing is set to 100 ms<br> InterDigit
Duration Timing is set to 100 ms<br> Pulse Rate Timing is set to 10
pulses/second<br> InterDigit Pulse Duration Timing is set to 750
ms<br> Percent Break of Pulse is 60 percent<br> GuardOut timer is 2000
ms<br> Minimum ring duration timer is 125 ms<br> Hookflash-in Timing
is set to 600 ms<br> Hookflash-out Timing is set to 50
ms<br> Supervisory Disconnnct Timing is set to 350 ms<br> OPX Ring
Wait Timing is set to 6000 ms</font></div>
<div> </div>
<div><font size="2" face="Arial">Foreign Exchange Office 0/0/1 Slot is 0, Sub-unit
is 0, Port is 1<br> Type of VoicePort is FXO<br> Operation State is
DORMANT<br> Administrative State is UP<br> No Interface Down
Failure<br> Description is not set<br> Noise Regeneration is
enabled<br> Non Linear Processing is enabled<br> Non Linear Mute is
disabled<br> Non Linear Threshold is -21 dB<br> Music On Hold
Threshold is Set to -38 dBm<br> In Gain is Set to 0 dB<br> Out
Attenuation is Set to 3 dB<br> Echo Cancellation is enabled<br> Echo
Cancellation NLP mute is disabled<br> Echo Cancellation NLP threshold is
-21 dB<br> Echo Cancel Coverage is set to 32 ms<br> Echo Cancel worst
case ERL is set to 6 dB<br> Playout-delay Mode is set to
adaptive<br> Playout-delay Nominal is set to 60 ms<br> Playout-delay
Maximum is set to 250 ms<br> Playout-delay Minimum mode is set to default,
value 40 ms<br> Playout-delay Fax is set to 300 ms<br> Connection Mode
is normal<br> Connection Number is not set<br> Initial Time Out is set
to 10 s<br> Interdigit Time Out is set to 10 s<br> Call Disconnect
Time Out is set to 5 s<br> Ringing Time Out is set to 180 s<br> Wait
Release Time Out is set to 5 s<br> Companding Type is u-law<br> Region
Tone is set for US</font></div>
<div> </div>
<div><font size="2" face="Arial"> Analog Info Follows:<br> Currently
processing none<br> Maintenance Mode Set to None (not in mtc
mode)<br> Number of signaling protocol errors are 0<br> Impedance is
set to 600r Ohm<br> Station name None, Station number
None<br> Translation profile (Incoming):<br> Translation profile
(Outgoing):</font></div>
<div> </div>
<div><font size="2" face="Arial"> Voice card specific Info
Follows:<br> Signal Type is loopStart<br> Battery-Reversal is
enabled<br> Number Of Rings is set to 1<br> Supervisory Disconnect is
dualtone mid-call<br> Answer Supervision is inactive<br> Hook Status
is On Hook<br> Ring Detect Status is inactive<br> Ring Ground Status
is inactive<br> Tip Ground Status is inactive<br> Dial Out Type is
dtmf<br> Digit Duration Timing is set to 100 ms<br> InterDigit
Duration Timing is set to 100 ms<br> Pulse Rate Timing is set to 10
pulses/second<br> InterDigit Pulse Duration Timing is set to 750
ms<br> Percent Break of Pulse is 60 percent<br> GuardOut timer is 2000
ms<br> Minimum ring duration timer is 125 ms<br> Hookflash-in Timing
is set to 600 ms<br> Hookflash-out Timing is set to 50
ms<br> Supervisory Disconnnct Timing is set to 350 ms<br> OPX Ring
Wait Timing is set to 6000 ms</font></div>
<div><font size="2" face="Arial"></font> </div>
<div><font size="2" face="Arial"> </font></div><font size="2" face="Arial"></font>
<div><font size="2" face="Arial"></font> </div>
<div align="left"><font size="2" face="Arial">Tim Reimers</font></div>
<div align="left"><font size="2" face="Arial">Systems Analyst II</font></div>
<div align="left"><font size="2" face="Arial">Information Technology
Services</font></div>
<div align="left"><font size="2" face="Arial">City of Asheville</font></div>
<div align="left"><font size="2" face="Arial">70 Court Plaza</font></div>
<div align="left"><font size="2" face="Arial">Asheville, NC 28801</font></div>
<div align="left"><font size="2" face="Arial">phone - 828-259-5512</font></div>
<div align="left"><font size="2" face="Arial"><a href="mailto:timreimers@ashevillenc.gov" target="_blank">treimers@ashevillenc.gov</a></font></div>
<div><font size="2" face="Arial"></font> </div><br>_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
</div></body></html>