<div>look at your dial-peers. both are pointing to the same port. change one of them to the other port number and it should come up.</div>
<div> </div>
<div>Scott<br><br></div>
<div class="gmail_quote">On Fri, Feb 13, 2009 at 11:58 AM, Tim Reimers <span dir="ltr"><<a href="mailto:treimers@ashevillenc.gov">treimers@ashevillenc.gov</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">huh...</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">As of right now, neither one is plugged into the telco</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">(since I cannot swap their incoming lines yet, if it don't work)</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">I rebooted the router this AM, and that's definitely been since I unplugged the lines last night and moved them back to the other router</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">(this is an upgrade from an EOL 1760)</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">Oddly enough, it's the first port - 0/0/0</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">I'd have expected weirdness out of the second one 0/0/1</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">but maybe I don't have a good reason for thinking that.</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">anyhow-- nothing plugged into either one, and nothing I can see in the config to indicate that either port would care.</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">Everything's identical.</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">I also whacked and rebuilt the CCM implementation of the GW, just in case.</font></span></div>
<div class="Ih2E3d">
<div> </div>
<div align="left"><font face="Arial" size="2">Tim Reimers</font></div>
<div align="left"><font face="Arial" size="2">Systems Analyst II</font></div>
<div align="left"><font face="Arial" size="2">Information Technology Services</font></div>
<div align="left"><font face="Arial" size="2">City of Asheville</font></div>
<div align="left"><font face="Arial" size="2">70 Court Plaza</font></div>
<div align="left"><font face="Arial" size="2">Asheville, NC 28801</font></div>
<div align="left"><font face="Arial" size="2">phone - 828-259-5512</font></div>
<div align="left"><font face="Arial" size="2"><a href="mailto:timreimers@ashevillenc.gov" target="_blank">treimers@ashevillenc.gov</a></font></div>
<div> </div><br></div>
<div lang="en-us" dir="ltr" align="left">
<hr>
<font face="Tahoma" size="2"><b>From:</b> Lelio Fulgenzi [mailto:<a href="mailto:lelio@uoguelph.ca" target="_blank">lelio@uoguelph.ca</a>] <br><b>Sent:</b> Friday, February 13, 2009 2:55 PM<br><b>To:</b> Tim Reimers<br><b>Cc:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<b>Subject:</b> Re: [cisco-voip] Registration rejected on a single FXO port of an MGCP 2801 with a 2FXO card?<br></font><br></div>
<div>
<div></div>
<div class="Wj3C7c">
<div></div>
<div style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Verdana">Is it plugged in? I think I recall unless it's plugged in, it won't register.<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Tim Reimers" <<a href="mailto:treimers@ashevillenc.gov" target="_blank">treimers@ashevillenc.gov</a>><br>
To: <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>Sent: Friday, February 13, 2009 2:40:55 PM GMT -05:00 US/Canada Eastern<br>Subject: [cisco-voip] Registration rejected on a single FXO port of an MGCP 2801 with a 2FXO card?<br>
<br>
<div><font face="Arial" size="2"></font> </div>
<div><span><font face="Arial" size="2">What in the world could be causing this?</font></span></div>
<div><span><font face="Arial" size="2">I've had registration issues with MGCP equipment in the past, being hostname/domain-name related</font></span></div>
<div><span><font face="Arial" size="2">That makes the entire device not register.</font></span></div>
<div><span><font face="Arial" size="2"></font></span> </div>
<div><span><font face="Arial" size="2">But I've never seen one port get rejected and the other one not!</font></span></div>
<div><span><font face="Arial" size="2">Weird.</font></span></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2">Product Cisco MGCP FXO Port <br>Gateway TransitGW2801.mydomain.local <br>Device Protocol Analog Access <br>Registration Rejected <br>IP Address 192.168.XXX.252 <br>End-Point Name <a href="mailto:AALN/S0/SU0/0@TransitGW2801.mydomain.local" target="_blank">AALN/S0/SU0/0@TransitGW2801.mydomain.local</a> </font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2">Product Cisco MGCP FXO Port <br>Gateway TransitGW2801.mydomain.local <br>Device Protocol Analog Access <br>Registration Registered with Cisco Unified Communications Manager 192.168.200.6 <br>
IP Address 192.168.XXX.252 <br>End-Point Name <a href="mailto:AALN/S0/SU0/1@TransitGW2801.mydomain.local" target="_blank">AALN/S0/SU0/1@TransitGW2801.mydomain.local</a> </font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font><font face="Arial" size="2"></font><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"><span>Everything is identical in the CCM (UCM 6.01)</span></font></div>
<div><font face="Arial" size="2"><span>both ports are configured EXACTLY the same way...</span></font></div>
<div><font face="Arial" size="2"><span></span></font> </div>
<div><font face="Arial" size="2"><span></span></font> </div>
<div><font face="Arial" size="2"><span></span></font> </div>
<div><font face="Arial" size="2"><span>What the heck is going on?</span></font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"><span>more info:</span></font></div>
<div><font face="Arial" size="2"></font> </div>
<div><br><span><font face="Arial" size="2">Config on the router:</font></span></div>
<div><span>voice-port 0/0/0<br> supervisory disconnect dualtone mid-call<br> echo-cancel coverage 32<br> timeouts call-disconnect 5<br> timeouts wait-release 5<br> timing hookflash-out 50<br>!<br>voice-port 0/0/1<br> supervisory disconnect dualtone mid-call<br>
echo-cancel coverage 32<br> timeouts call-disconnect 5<br> timeouts wait-release 5<br> timing hookflash-out 50<br>!<br>ccm-manager switchback immediate<br>ccm-manager fallback-mgcp<br>ccm-manager redundant-host 192.168.200.2<br>
ccm-manager mgcp<br>no ccm-manager fax protocol cisco<br>ccm-manager music-on-hold<br>ccm-manager config server 192.168.200.2<br>!<br>mgcp<br>mgcp call-agent 192.168.200.6 service-type mgcp version 0.1<br>mgcp dtmf-relay voip codec all mode out-of-band<br>
mgcp rtp unreachable timeout 1000 action notify<br>mgcp modem passthrough voip mode nse<br>mgcp package-capability rtp-package<br>no mgcp package-capability res-package<br>mgcp package-capability sst-package<br>no mgcp package-capability fxr-package<br>
no mgcp timer receive-rtcp<br>mgcp sdp simple<br>mgcp fax t38 inhibit<br>mgcp rtp payload-type g726r16 static<br>mgcp bind control source-interface FastEthernet0/0<br>mgcp bind media source-interface FastEthernet0/0<br>!<br>
mgcp profile default</span></div>
<div><font face="Arial" size="2"></font> </div>
<div>
<div><font face="Arial" size="2"><span></span></font> </div>
<div><font face="Arial" size="2"><span>dial-peer voice 99900 pots<br> service mgcpapp<br> port 0/0/1<br>!<br>dial-peer voice 99901 pots<br> service mgcpapp<br> port 0/0/1<br>!<br>dial-peer voice 2000 voip<br> incoming called-number .<br>
dtmf-relay h245-alphanumeric<br> codec g711ulaw<br> no vad</span></font></div></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial"><font size="2"><span>Running: </span>c2801-spservicesk9-mz.124-9.T7.bin</font></font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"><span>TransitGW2801#sh mgcp endpoint<br><a href="mailto:aaln/S0/SU0/1@TransitGW2801" target="_blank">aaln/S0/SU0/1@TransitGW2801</a></span></font></div>
<div><font face="Arial" size="2"><span></span></font> </div>
<div><font face="Arial" size="2"><span></span></font> </div>
<div><font face="Arial" size="2"><span>That output should ALSO show</span></font></div>
<div><font face="Arial" size="2"><span><a href="mailto:aaln/S0/SU0/0@TransitGW2801" target="_blank">aaln/S0/SU0/0@TransitGW2801</a></span></font></div>
<div><font face="Arial" size="2"><span></span></font> </div>
<div><font face="Arial" size="2"><span>and would show it, I think, if the port registered.</span></font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2">TransitGW2801#sh voice port summary<br> IN OUT<br>PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC<br>============== == ============ ===== ==== ======== ======== ==<br>
0/0/0 -- fxo-ls up dorm idle on-hook y<br>0/0/1 -- fxo-ls up dorm idle on-hook y</font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2">TransitGW2801#sh mgcp statistics<br> UDP pkts rx 828, tx 828<br> Unrecognized rx pkts 0, MGCP message parsing errors 0<br> Duplicate MGCP ack tx 0, Invalid versions count 0<br> CreateConn rx 5, successful 0, failed 5<br>
DeleteConn rx 5, successful 5, failed 0<br> ModifyConn rx 0, successful 0, failed 0<br> DeleteConn tx 0, successful 0, failed 0<br> NotifyRequest rx 12, successful 11, failed 1<br> AuditConnection rx 0, successful 0, failed 0<br>
AuditEndpoint rx 1, successful 1, failed 0<br> RestartInProgress tx 1, successful 1, failed 0<br> Notify tx 804, successful 804, failed 0<br> ACK tx 17, NACK tx 6<br> ACK rx 805, NACK rx 0</font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"> IP address based Call Agents statistics:<br> IP address 192.168.200.6, Total msg rx 828,<br> successful 822, failed 6<br> System resource check is DISABLED. No available statistic</font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"> DS0 Resource Statistics<br> -----------------------<br> Utilization: 0.00 percent<br> Total channels: 1<span> < This would appear to just confirm the fact that only one port registered, not be a source of the problem</span><br>
Addressable channels: 1<br> Inuse channels: 0<br> Disabled channels: 0<br> Free channels: 1</font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"><span>## Both ports exist--- both are admin UP, with no failures, both are Loop Start</span></font></div>
<div><font face="Arial" size="2"><span>So it's not something confused with the hardware. </span></font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2">TransitGW2801#sh voice port</font></div>
<div> </div>
<div><font face="Arial" size="2">Foreign Exchange Office 0/0/0 Slot is 0, Sub-unit is 0, Port is 0<br> Type of VoicePort is FXO<br> Operation State is DORMANT<br> Administrative State is UP<br> No Interface Down Failure<br>
Description is not set<br> Noise Regeneration is enabled<br> Non Linear Processing is enabled<br> Non Linear Mute is disabled<br> Non Linear Threshold is -21 dB<br> Music On Hold Threshold is Set to -38 dBm<br> In Gain is Set to 0 dB<br>
Out Attenuation is Set to 3 dB<br> Echo Cancellation is enabled<br> Echo Cancellation NLP mute is disabled<br> Echo Cancellation NLP threshold is -21 dB<br> Echo Cancel Coverage is set to 32 ms<br> Echo Cancel worst case ERL is set to 6 dB<br>
Playout-delay Mode is set to adaptive<br> Playout-delay Nominal is set to 60 ms<br> Playout-delay Maximum is set to 250 ms<br> Playout-delay Minimum mode is set to default, value 40 ms<br> Playout-delay Fax is set to 300 ms<br>
Connection Mode is normal<br> Connection Number is not set<br> Initial Time Out is set to 10 s<br> Interdigit Time Out is set to 10 s<br> Call Disconnect Time Out is set to 5 s<br> Ringing Time Out is set to 180 s<br> Wait Release Time Out is set to 5 s<br>
Companding Type is u-law<br> Region Tone is set for US</font></div>
<div> </div>
<div><font face="Arial" size="2"> Analog Info Follows:<br> Currently processing none<br> Maintenance Mode Set to None (not in mtc mode)<br> Number of signaling protocol errors are 0<br> Impedance is set to 600r Ohm<br> Station name None, Station number None<br>
Translation profile (Incoming):<br> Translation profile (Outgoing):</font></div>
<div> </div>
<div><font face="Arial" size="2"> Voice card specific Info Follows:<br> Signal Type is loopStart<br> Battery-Reversal is enabled<br> Number Of Rings is set to 1<br> Supervisory Disconnect is dualtone mid-call<br> Answer Supervision is inactive<br>
Hook Status is On Hook<br> Ring Detect Status is inactive<br> Ring Ground Status is inactive<br> Tip Ground Status is inactive<br> Dial Out Type is dtmf<br> Digit Duration Timing is set to 100 ms<br> InterDigit Duration Timing is set to 100 ms<br>
Pulse Rate Timing is set to 10 pulses/second<br> InterDigit Pulse Duration Timing is set to 750 ms<br> Percent Break of Pulse is 60 percent<br> GuardOut timer is 2000 ms<br> Minimum ring duration timer is 125 ms<br> Hookflash-in Timing is set to 600 ms<br>
Hookflash-out Timing is set to 50 ms<br> Supervisory Disconnnct Timing is set to 350 ms<br> OPX Ring Wait Timing is set to 6000 ms</font></div>
<div> </div>
<div><font face="Arial" size="2">Foreign Exchange Office 0/0/1 Slot is 0, Sub-unit is 0, Port is 1<br> Type of VoicePort is FXO<br> Operation State is DORMANT<br> Administrative State is UP<br> No Interface Down Failure<br>
Description is not set<br> Noise Regeneration is enabled<br> Non Linear Processing is enabled<br> Non Linear Mute is disabled<br> Non Linear Threshold is -21 dB<br> Music On Hold Threshold is Set to -38 dBm<br> In Gain is Set to 0 dB<br>
Out Attenuation is Set to 3 dB<br> Echo Cancellation is enabled<br> Echo Cancellation NLP mute is disabled<br> Echo Cancellation NLP threshold is -21 dB<br> Echo Cancel Coverage is set to 32 ms<br> Echo Cancel worst case ERL is set to 6 dB<br>
Playout-delay Mode is set to adaptive<br> Playout-delay Nominal is set to 60 ms<br> Playout-delay Maximum is set to 250 ms<br> Playout-delay Minimum mode is set to default, value 40 ms<br> Playout-delay Fax is set to 300 ms<br>
Connection Mode is normal<br> Connection Number is not set<br> Initial Time Out is set to 10 s<br> Interdigit Time Out is set to 10 s<br> Call Disconnect Time Out is set to 5 s<br> Ringing Time Out is set to 180 s<br> Wait Release Time Out is set to 5 s<br>
Companding Type is u-law<br> Region Tone is set for US</font></div>
<div> </div>
<div><font face="Arial" size="2"> Analog Info Follows:<br> Currently processing none<br> Maintenance Mode Set to None (not in mtc mode)<br> Number of signaling protocol errors are 0<br> Impedance is set to 600r Ohm<br> Station name None, Station number None<br>
Translation profile (Incoming):<br> Translation profile (Outgoing):</font></div>
<div> </div>
<div><font face="Arial" size="2"> Voice card specific Info Follows:<br> Signal Type is loopStart<br> Battery-Reversal is enabled<br> Number Of Rings is set to 1<br> Supervisory Disconnect is dualtone mid-call<br> Answer Supervision is inactive<br>
Hook Status is On Hook<br> Ring Detect Status is inactive<br> Ring Ground Status is inactive<br> Tip Ground Status is inactive<br> Dial Out Type is dtmf<br> Digit Duration Timing is set to 100 ms<br> InterDigit Duration Timing is set to 100 ms<br>
Pulse Rate Timing is set to 10 pulses/second<br> InterDigit Pulse Duration Timing is set to 750 ms<br> Percent Break of Pulse is 60 percent<br> GuardOut timer is 2000 ms<br> Minimum ring duration timer is 125 ms<br> Hookflash-in Timing is set to 600 ms<br>
Hookflash-out Timing is set to 50 ms<br> Supervisory Disconnnct Timing is set to 350 ms<br> OPX Ring Wait Timing is set to 6000 ms</font></div>
<div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2"></font> </div><font face="Arial" size="2"></font>
<div><font face="Arial" size="2"></font> </div>
<div align="left"><font face="Arial" size="2">Tim Reimers</font></div>
<div align="left"><font face="Arial" size="2">Systems Analyst II</font></div>
<div align="left"><font face="Arial" size="2">Information Technology Services</font></div>
<div align="left"><font face="Arial" size="2">City of Asheville</font></div>
<div align="left"><font face="Arial" size="2">70 Court Plaza</font></div>
<div align="left"><font face="Arial" size="2">Asheville, NC 28801</font></div>
<div align="left"><font face="Arial" size="2">phone - 828-259-5512</font></div>
<div align="left"><font face="Arial" size="2"><a href="mailto:timreimers@ashevillenc.gov" target="_blank">treimers@ashevillenc.gov</a></font></div>
<div><font face="Arial" size="2"></font> </div><br>_______________________________________________ cisco-voip mailing list <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a> </div>
</div></div></div><br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>