<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.6000.16788" name=GENERATOR></HEAD>
<BODY>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><SPAN class=463212919-13022009><FONT face=Arial size=2>What in the world
could be causing this?</FONT></SPAN></DIV>
<DIV><SPAN class=463212919-13022009><FONT face=Arial size=2>I've had
registration issues with MGCP equipment in the past, being hostname/domain-name
related</FONT></SPAN></DIV>
<DIV><SPAN class=463212919-13022009><FONT face=Arial size=2>That makes the
entire device not register.</FONT></SPAN></DIV>
<DIV><SPAN class=463212919-13022009><FONT face=Arial
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=463212919-13022009><FONT face=Arial size=2>But I've never seen
one port get rejected and the other one not!</FONT></SPAN></DIV>
<DIV><SPAN class=463212919-13022009><FONT face=Arial
size=2>Weird.</FONT></SPAN></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Product Cisco MGCP FXO Port <BR>Gateway
TransitGW2801.mydomain.local <BR>Device Protocol Analog Access <BR>Registration
Rejected <BR>IP Address 192.168.XXX.252 <BR>End-Point Name <A
href="mailto:AALN/S0/SU0/0@TransitGW2801.mydomain.local">AALN/S0/SU0/0@TransitGW2801.mydomain.local</A>
</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Product Cisco MGCP FXO Port <BR>Gateway
TransitGW2801.mydomain.local <BR>Device Protocol Analog Access <BR>Registration
Registered with Cisco Unified Communications Manager 192.168.200.6 <BR>IP
Address 192.168.XXX.252 <BR>End-Point Name <A
href="mailto:AALN/S0/SU0/1@TransitGW2801.mydomain.local">AALN/S0/SU0/1@TransitGW2801.mydomain.local</A>
</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT><FONT face=Arial size=2></FONT><FONT
face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>Everything is
identical in the CCM (UCM 6.01)</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>both ports are
configured EXACTLY the same way...</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN
class=463212919-13022009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN
class=463212919-13022009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN
class=463212919-13022009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>What the heck is
going on?</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>more
info:</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><BR><SPAN class=463212919-13022009><FONT face=Arial size=2>Config on the
router:</FONT></SPAN></DIV>
<DIV><SPAN class=463212919-13022009>voice-port 0/0/0<BR> supervisory
disconnect dualtone mid-call<BR> echo-cancel coverage 32<BR> timeouts
call-disconnect 5<BR> timeouts wait-release 5<BR> timing hookflash-out
50<BR>!<BR>voice-port 0/0/1<BR> supervisory disconnect dualtone
mid-call<BR> echo-cancel coverage 32<BR> timeouts call-disconnect
5<BR> timeouts wait-release 5<BR> timing hookflash-out
50<BR>!<BR>ccm-manager switchback immediate<BR>ccm-manager
fallback-mgcp<BR>ccm-manager redundant-host 192.168.200.2<BR>ccm-manager
mgcp<BR>no ccm-manager fax protocol cisco<BR>ccm-manager
music-on-hold<BR>ccm-manager config server 192.168.200.2<BR>!<BR>mgcp<BR>mgcp
call-agent 192.168.200.6 service-type mgcp version 0.1<BR>mgcp dtmf-relay voip
codec all mode out-of-band<BR>mgcp rtp unreachable timeout 1000 action
notify<BR>mgcp modem passthrough voip mode nse<BR>mgcp package-capability
rtp-package<BR>no mgcp package-capability res-package<BR>mgcp package-capability
sst-package<BR>no mgcp package-capability fxr-package<BR>no mgcp timer
receive-rtcp<BR>mgcp sdp simple<BR>mgcp fax t38 inhibit<BR>mgcp rtp payload-type
g726r16 static<BR>mgcp bind control source-interface FastEthernet0/0<BR>mgcp
bind media source-interface FastEthernet0/0<BR>!<BR>mgcp profile
default</SPAN></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>
<DIV><FONT face=Arial size=2><SPAN
class=463212919-13022009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>dial-peer voice
99900 pots<BR> service mgcpapp<BR> port 0/0/1<BR>!<BR>dial-peer voice
99901 pots<BR> service mgcpapp<BR> port 0/0/1<BR>!<BR>dial-peer voice
2000 voip<BR> incoming called-number .<BR> dtmf-relay
h245-alphanumeric<BR> codec g711ulaw<BR> no
vad</SPAN></FONT></DIV></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial><FONT size=2><SPAN class=463212919-13022009>Running:
</SPAN>c2801-spservicesk9-mz.124-9.T7.bin</FONT></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>TransitGW2801#sh
mgcp endpoint<BR><A
href="mailto:aaln/S0/SU0/1@TransitGW2801">aaln/S0/SU0/1@TransitGW2801</A></SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN
class=463212919-13022009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN
class=463212919-13022009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>That output should
ALSO show</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009><A
href="mailto:aaln/S0/SU0/0@TransitGW2801">aaln/S0/SU0/0@TransitGW2801</A></SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN
class=463212919-13022009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>and would show it, I
think, if the port registered.</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>TransitGW2801#sh voice port
summary<BR>
IN
OUT<BR>PORT
CH SIG-TYPE ADMIN OPER STATUS
STATUS EC<BR>============== == ============ ===== ==== ========
======== ==<BR>0/0/0
-- fxo-ls up dorm
idle on-hook
y<BR>0/0/1 --
fxo-ls up dorm
idle on-hook y</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>TransitGW2801#sh mgcp statistics<BR> UDP pkts
rx 828, tx 828<BR> Unrecognized rx pkts 0, MGCP message parsing errors
0<BR> Duplicate MGCP ack tx 0, Invalid versions count 0<BR> CreateConn
rx 5, successful 0, failed 5<BR> DeleteConn rx 5, successful 5, failed
0<BR> ModifyConn rx 0, successful 0, failed 0<BR> DeleteConn tx 0,
successful 0, failed 0<BR> NotifyRequest rx 12, successful 11, failed
1<BR> AuditConnection rx 0, successful 0, failed 0<BR> AuditEndpoint
rx 1, successful 1, failed 0<BR> RestartInProgress tx 1, successful 1,
failed 0<BR> Notify tx 804, successful 804, failed 0<BR> ACK tx 17,
NACK tx 6<BR> ACK rx 805, NACK rx 0</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> IP address based Call Agents
statistics:<BR> IP address 192.168.200.6, Total msg rx
828,<BR>
successful 822, failed 6<BR> System resource check is DISABLED. No
available statistic</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> DS0 Resource
Statistics<BR> -----------------------<BR> Utilization: 0.00
percent<BR> Total channels: 1<SPAN
class=463212919-13022009>
< This would appear to just confirm the fact that only one port registered,
not be a source of the problem</SPAN><BR> Addressable channels:
1<BR> Inuse channels: 0<BR> Disabled channels: 0<BR> Free
channels: 1</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>## Both ports
exist--- both are admin UP, with no failures, both are Loop
Start</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=463212919-13022009>So it's not
something confused with the hardware. </SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>TransitGW2801#sh voice port</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Foreign Exchange Office 0/0/0 Slot is 0, Sub-unit
is 0, Port is 0<BR> Type of VoicePort is FXO<BR> Operation State is
DORMANT<BR> Administrative State is UP<BR> No Interface Down
Failure<BR> Description is not set<BR> Noise Regeneration is
enabled<BR> Non Linear Processing is enabled<BR> Non Linear Mute is
disabled<BR> Non Linear Threshold is -21 dB<BR> Music On Hold
Threshold is Set to -38 dBm<BR> In Gain is Set to 0 dB<BR> Out
Attenuation is Set to 3 dB<BR> Echo Cancellation is enabled<BR> Echo
Cancellation NLP mute is disabled<BR> Echo Cancellation NLP threshold is
-21 dB<BR> Echo Cancel Coverage is set to 32 ms<BR> Echo Cancel worst
case ERL is set to 6 dB<BR> Playout-delay Mode is set to
adaptive<BR> Playout-delay Nominal is set to 60 ms<BR> Playout-delay
Maximum is set to 250 ms<BR> Playout-delay Minimum mode is set to default,
value 40 ms<BR> Playout-delay Fax is set to 300 ms<BR> Connection Mode
is normal<BR> Connection Number is not set<BR> Initial Time Out is set
to 10 s<BR> Interdigit Time Out is set to 10 s<BR> Call Disconnect
Time Out is set to 5 s<BR> Ringing Time Out is set to 180 s<BR> Wait
Release Time Out is set to 5 s<BR> Companding Type is u-law<BR> Region
Tone is set for US</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2> Analog Info Follows:<BR> Currently
processing none<BR> Maintenance Mode Set to None (not in mtc
mode)<BR> Number of signaling protocol errors are 0<BR> Impedance is
set to 600r Ohm<BR> Station name None, Station number
None<BR> Translation profile (Incoming):<BR> Translation profile
(Outgoing):</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2> Voice card specific Info
Follows:<BR> Signal Type is loopStart<BR> Battery-Reversal is
enabled<BR> Number Of Rings is set to 1<BR> Supervisory Disconnect is
dualtone mid-call<BR> Answer Supervision is inactive<BR> Hook Status
is On Hook<BR> Ring Detect Status is inactive<BR> Ring Ground Status
is inactive<BR> Tip Ground Status is inactive<BR> Dial Out Type is
dtmf<BR> Digit Duration Timing is set to 100 ms<BR> InterDigit
Duration Timing is set to 100 ms<BR> Pulse Rate Timing is set to 10
pulses/second<BR> InterDigit Pulse Duration Timing is set to 750
ms<BR> Percent Break of Pulse is 60 percent<BR> GuardOut timer is 2000
ms<BR> Minimum ring duration timer is 125 ms<BR> Hookflash-in Timing
is set to 600 ms<BR> Hookflash-out Timing is set to 50
ms<BR> Supervisory Disconnnct Timing is set to 350 ms<BR> OPX Ring
Wait Timing is set to 6000 ms</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Foreign Exchange Office 0/0/1 Slot is 0, Sub-unit
is 0, Port is 1<BR> Type of VoicePort is FXO<BR> Operation State is
DORMANT<BR> Administrative State is UP<BR> No Interface Down
Failure<BR> Description is not set<BR> Noise Regeneration is
enabled<BR> Non Linear Processing is enabled<BR> Non Linear Mute is
disabled<BR> Non Linear Threshold is -21 dB<BR> Music On Hold
Threshold is Set to -38 dBm<BR> In Gain is Set to 0 dB<BR> Out
Attenuation is Set to 3 dB<BR> Echo Cancellation is enabled<BR> Echo
Cancellation NLP mute is disabled<BR> Echo Cancellation NLP threshold is
-21 dB<BR> Echo Cancel Coverage is set to 32 ms<BR> Echo Cancel worst
case ERL is set to 6 dB<BR> Playout-delay Mode is set to
adaptive<BR> Playout-delay Nominal is set to 60 ms<BR> Playout-delay
Maximum is set to 250 ms<BR> Playout-delay Minimum mode is set to default,
value 40 ms<BR> Playout-delay Fax is set to 300 ms<BR> Connection Mode
is normal<BR> Connection Number is not set<BR> Initial Time Out is set
to 10 s<BR> Interdigit Time Out is set to 10 s<BR> Call Disconnect
Time Out is set to 5 s<BR> Ringing Time Out is set to 180 s<BR> Wait
Release Time Out is set to 5 s<BR> Companding Type is u-law<BR> Region
Tone is set for US</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2> Analog Info Follows:<BR> Currently
processing none<BR> Maintenance Mode Set to None (not in mtc
mode)<BR> Number of signaling protocol errors are 0<BR> Impedance is
set to 600r Ohm<BR> Station name None, Station number
None<BR> Translation profile (Incoming):<BR> Translation profile
(Outgoing):</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2> Voice card specific Info
Follows:<BR> Signal Type is loopStart<BR> Battery-Reversal is
enabled<BR> Number Of Rings is set to 1<BR> Supervisory Disconnect is
dualtone mid-call<BR> Answer Supervision is inactive<BR> Hook Status
is On Hook<BR> Ring Detect Status is inactive<BR> Ring Ground Status
is inactive<BR> Tip Ground Status is inactive<BR> Dial Out Type is
dtmf<BR> Digit Duration Timing is set to 100 ms<BR> InterDigit
Duration Timing is set to 100 ms<BR> Pulse Rate Timing is set to 10
pulses/second<BR> InterDigit Pulse Duration Timing is set to 750
ms<BR> Percent Break of Pulse is 60 percent<BR> GuardOut timer is 2000
ms<BR> Minimum ring duration timer is 125 ms<BR> Hookflash-in Timing
is set to 600 ms<BR> Hookflash-out Timing is set to 50
ms<BR> Supervisory Disconnnct Timing is set to 350 ms<BR> OPX Ring
Wait Timing is set to 6000 ms</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> </DIV></FONT>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV align=left><FONT face=Arial size=2>Tim Reimers</FONT></DIV>
<DIV align=left><FONT face=Arial size=2>Systems Analyst II</FONT></DIV>
<DIV align=left><FONT face=Arial size=2>Information Technology
Services</FONT></DIV>
<DIV align=left><FONT face=Arial size=2>City of Asheville</FONT></DIV>
<DIV align=left><FONT face=Arial size=2>70 Court Plaza</FONT></DIV>
<DIV align=left><FONT face=Arial size=2>Asheville, NC 28801</FONT></DIV>
<DIV align=left><FONT face=Arial size=2>phone - 828-259-5512</FONT></DIV>
<DIV align=left><FONT face=Arial size=2><A
href="mailto:timreimers@ashevillenc.gov">treimers@ashevillenc.gov</A></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>