<div class="gmail_quote">
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>Hello Antonio:</div>
<div> </div>
<div>Your situation as you describe it...</div>
<div> </div>
<div>H232 voice Gateway - E1 PRI<br>PTSN num - 2602300<br>Phone ext num 3xx<br>I want that when peopel call 2603301 it go to ext 301 and so on</div>
<div> </div>
<div>Not knowing what you have configured so far I will start from the beginning. Pardon me if I am repeating things you have already done...</div>
<div> </div>
<div>1. Configure a pots dial peer to accept DID:</div>
<div> dial-peer voice x pots</div>
<div> direct-inward-dial</div>
<div> incoming called-number .</div>
<div> </div>
<div>2. Configure a voip dial peer to have the CallManager process incoming calls</div>
<div> dial-peer voice y voip</div>
<div> destination-pattern 26023..</div>
<div> session target ipv4:your_call_manager_ip</div>
<div> </div>
<div>3. Configure a translation pattern and specify "26023XX", in the called party transformation text box specify "3XX"</div>
<div> </div>
<div>4. Configure phone with 3xx numbers</div>
<div> </div>
<div>This should do the trick for inbound calling.</div>
<div> </div>
<div>I hope this helps.</div>
<div> </div>
<div>Regards. Inder.</div>
<div> </div></blockquote></div><br>